On Thu, 19 Oct 2023 at 11:42, Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> wrote: > > Stromer plus APSS PLL does not support dynamic frequency scaling. > To switch between frequencies, we have to shut down the PLL, > configure the L and ALPHA values and turn on again. So introduce the > separate set of ops for Stromer Plus PLL. > > Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx> > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> > --- > v4: Ensure PLL is enabled before re-enabling > v3: Use prepare/unprepare instead of disable/enable in clk_alpha_pll_stromer_plus_ops > v2: Use clk_alpha_pll_stromer_determine_rate, instead of adding new > clk_alpha_pll_stromer_plus_determine_rate as the alpha pll width > is same for both > > Fix review comments > udelay(50) -> usleep_range(50, 60) > Remove SoC-specific from print message > --- > drivers/clk/qcom/clk-alpha-pll.c | 63 ++++++++++++++++++++++++++++++++++++++++ > drivers/clk/qcom/clk-alpha-pll.h | 1 + > 2 files changed, 64 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> -- With best wishes Dmitry
