> 2015-09-02 19:13 GMT+09:00 Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>:
>> fDeviceInit query response time for some devices is too long that
>> default
>> query request timeout of 100ms may not be enough. Experiments show that
>> fDeviceInit response sometimes takes 500ms so to be on safer side this
>> change sets the timeout to 600ms. Without this change, we might
>> unnecessarily have to retry fDeviceInit query requests multiple times
>> and
>> each query request timeout prints one error message.
>>
>> Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
>> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
>>
>> ---
>> drivers/scsi/ufs/ufshcd.c | 12 +++++++++++-
>> 1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index e0b8755..573a8cb 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -58,6 +58,12 @@
>> #define QUERY_REQ_RETRIES 10
>> /* Query request timeout */
>> #define QUERY_REQ_TIMEOUT 30 /* msec */
>> +/*
>> + * Query request timeout for fDeviceInit flag
>> + * fDeviceInit query response time for some devices is too large that
>> default
>> + * QUERY_REQ_TIMEOUT may not be enough for such devices.
>> + */
>> +#define QUERY_FDEVICEINIT_REQ_TIMEOUT 600 /* msec */
>
> How about just increasing QUERY_REQ_TIMEOUT from 30ms to 600ms
> instead of conditionally setting timeout depending on ufs flag?
Your suggestion obviously could work (increasing the QUERY_REQ_TIMEOUT to
600ms), but in that case we bring extra delay of 570ms to error handling
of query timeout, and in such a case, instead of handling the error after
30ms we handle it after 600ms, which make the SW hang.
does it make sense ?
>
>>
>> /* Task management command timeout */
>> #define TM_CMD_TIMEOUT 100 /* msecs */
>> @@ -1651,6 +1657,7 @@ static int ufshcd_query_flag(struct ufs_hba *hba,
>> enum query_opcode opcode,
>> struct ufs_query_req *request = NULL;
>> struct ufs_query_res *response = NULL;
>> int err, index = 0, selector = 0;
>> + int timeout = QUERY_REQ_TIMEOUT;
>>
>> BUG_ON(!hba);
>>
>> @@ -1683,7 +1690,10 @@ static int ufshcd_query_flag(struct ufs_hba *hba,
>> enum query_opcode opcode,
>> goto out_unlock;
>> }
>>
>> - err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY,
>> QUERY_REQ_TIMEOUT);
>> + if (idn == QUERY_FLAG_IDN_FDEVICEINIT)
>> + timeout = QUERY_FDEVICEINIT_REQ_TIMEOUT;
>> +
>> + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout);
>>
>> if (err) {
>> dev_err(hba->dev,
>> --
>> 1.8.5.2
>>
>> --
>> QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a
>> member of Code Aurora Forum, hosted by The Linux Foundation
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
