It can be useful to know with which return value for example the typec_retimer_set call failed, so include this info in the dev_err prints. Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- Changes in v2: - Add ret to print in more prints, not just typec_retimer_set (Bjorn) - Link to v1: https://lore.kernel.org/r/20231013-glink-altmode-ret-v1-1-77941537a35b@xxxxxxxxxxxxx --- drivers/soc/qcom/pmic_glink_altmode.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c index 9569d999391d..0a75bfac5e02 100644 --- a/drivers/soc/qcom/pmic_glink_altmode.c +++ b/drivers/soc/qcom/pmic_glink_altmode.c @@ -160,7 +160,7 @@ static void pmic_glink_altmode_enable_dp(struct pmic_glink_altmode *altmode, ret = typec_mux_set(port->typec_mux, &port->state); if (ret) - dev_err(altmode->dev, "failed to switch mux to DP\n"); + dev_err(altmode->dev, "failed to switch mux to DP: %d\n", ret); port->retimer_state.alt = &port->dp_alt; port->retimer_state.data = &dp_data; @@ -168,7 +168,7 @@ static void pmic_glink_altmode_enable_dp(struct pmic_glink_altmode *altmode, ret = typec_retimer_set(port->typec_retimer, &port->retimer_state); if (ret) - dev_err(altmode->dev, "failed to setup retimer to DP\n"); + dev_err(altmode->dev, "failed to setup retimer to DP: %d\n", ret); } static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode, @@ -182,7 +182,7 @@ static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode, ret = typec_mux_set(port->typec_mux, &port->state); if (ret) - dev_err(altmode->dev, "failed to switch mux to USB\n"); + dev_err(altmode->dev, "failed to switch mux to USB: %d\n", ret); port->retimer_state.alt = NULL; port->retimer_state.data = NULL; @@ -190,7 +190,7 @@ static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode, ret = typec_retimer_set(port->typec_retimer, &port->retimer_state); if (ret) - dev_err(altmode->dev, "failed to setup retimer to USB\n"); + dev_err(altmode->dev, "failed to setup retimer to USB: %d\n", ret); } static void pmic_glink_altmode_safe(struct pmic_glink_altmode *altmode, @@ -204,7 +204,7 @@ static void pmic_glink_altmode_safe(struct pmic_glink_altmode *altmode, ret = typec_mux_set(port->typec_mux, &port->state); if (ret) - dev_err(altmode->dev, "failed to switch mux to safe mode\n"); + dev_err(altmode->dev, "failed to switch mux to safe mode: %d\n", ret); port->retimer_state.alt = NULL; port->retimer_state.data = NULL; @@ -212,7 +212,7 @@ static void pmic_glink_altmode_safe(struct pmic_glink_altmode *altmode, ret = typec_retimer_set(port->typec_retimer, &port->retimer_state); if (ret) - dev_err(altmode->dev, "failed to setup retimer to USB\n"); + dev_err(altmode->dev, "failed to setup retimer to USB: %d\n", ret); } static void pmic_glink_altmode_worker(struct work_struct *work) @@ -397,7 +397,7 @@ static void pmic_glink_altmode_enable_worker(struct work_struct *work) ret = pmic_glink_altmode_request(altmode, ALTMODE_PAN_EN, 0); if (ret) - dev_err(altmode->dev, "failed to request altmode notifications\n"); + dev_err(altmode->dev, "failed to request altmode notifications: %d\n", ret); } static void pmic_glink_altmode_pdr_notify(void *priv, int state) --- base-commit: e3b18f7200f45d66f7141136c25554ac1e82009b change-id: 20231013-glink-altmode-ret-3911e6c1eab5 Best regards, -- Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
