MSM8917 uses the SMPA2 and LDOA3 regulators provided by the PM8937 PMIC
for the VDDCX and VDDMX power domains in voltage level mode,
respectively. These definitions should also work on MSM8937.
Signed-off-by: Otto Pflüger <otto.pflueger@xxxxxxxxx>
---
drivers/pmdomain/qcom/rpmpd.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/pmdomain/qcom/rpmpd.c b/drivers/pmdomain/qcom/rpmpd.c
index 3135dd1dafe0..2980ebd6ed8c 100644
--- a/drivers/pmdomain/qcom/rpmpd.c
+++ b/drivers/pmdomain/qcom/rpmpd.c
@@ -257,6 +257,24 @@ static struct rpmpd mx_l3a_corner_ao = {
.key = KEY_CORNER,
};
+static struct rpmpd mx_l3a_lvl_ao;
+static struct rpmpd mx_l3a_lvl = {
+ .pd = { .name = "mx", },
+ .peer = &mx_l3a_lvl_ao,
+ .res_type = RPMPD_LDOA,
+ .res_id = 3,
+ .key = KEY_LEVEL,
+};
+
+static struct rpmpd mx_l3a_lvl_ao = {
+ .pd = { .name = "mx_ao", },
+ .peer = &mx_l3a_lvl,
+ .active_only = true,
+ .res_type = RPMPD_LDOA,
+ .res_id = 3,
+ .key = KEY_LEVEL,
+};
+
static struct rpmpd mx_l12a_lvl_ao;
static struct rpmpd mx_l12a_lvl = {
.pd = { .name = "mx", },
@@ -572,6 +590,20 @@ static const struct rpmpd_desc msm8916_desc = {
.max_state = MAX_CORNER_RPMPD_STATE,
};
+static struct rpmpd *msm8917_rpmpds[] = {
+ [MSM8917_VDDCX] = &cx_s2a_lvl,
+ [MSM8917_VDDCX_AO] = &cx_s2a_lvl_ao,
+ [MSM8917_VDDCX_VFL] = &cx_s2a_vfl,
+ [MSM8917_VDDMX] = &mx_l3a_lvl,
+ [MSM8917_VDDMX_AO] = &mx_l3a_lvl_ao,
+};
+
+static const struct rpmpd_desc msm8917_desc = {
+ .rpmpds = msm8917_rpmpds,
+ .num_pds = ARRAY_SIZE(msm8917_rpmpds),
+ .max_state = RPM_SMD_LEVEL_TURBO,
+};
+
static struct rpmpd *msm8953_rpmpds[] = {
[MSM8953_VDDMD] = &md_s1a_lvl,
[MSM8953_VDDMD_AO] = &md_s1a_lvl_ao,
@@ -764,6 +796,7 @@ static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,msm8226-rpmpd", .data = &msm8226_desc },
{ .compatible = "qcom,msm8909-rpmpd", .data = &msm8916_desc },
{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
+ { .compatible = "qcom,msm8917-rpmpd", .data = &msm8917_desc },
{ .compatible = "qcom,msm8939-rpmpd", .data = &msm8939_desc },
{ .compatible = "qcom,msm8953-rpmpd", .data = &msm8953_desc },
{ .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc },
--
2.39.2
