On 10/11/23 19:02, Luca Weiss wrote:
Add support for this smartphone based on the MSM8926 SoC, codenamed
"memul".
Supported functionality:
* Power & volume buttons
* ADSP
* Magnetometer
* Accelerometer
* Touchscreen
* Vibrator
* Internal storage
* SD card
* Charger
* USB
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts | 337 ++++++++++++++++++++++
2 files changed, 338 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index a3d293e40820..0cb272f4fa45 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8916-samsung-e7.dtb \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
+ qcom-msm8926-htc-memul.dtb \
qcom-msm8926-microsoft-superman-lte.dtb \
qcom-msm8926-microsoft-tesla.dtb \
qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 000000000000..b848f0cce3b4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+ model = "HTC One Mini 2";
+ compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ unknown@5b00000 {
+ reg = <0x05b00000 0x200000>;
+ no-map;
+ };
+
+ unknown@7a00000 {
+ reg = <0x07a00000 0x100000>;
+ no-map;
+ };
+
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x4f00000>;
+ no-map;
+ };
+
+ unknown@cf00000 {
+ reg = <0x0cf00000 0x200000>;
+ no-map;
+ };
+
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x3a000>;
+ no-map;
+ };
+
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0x650000>;
+ no-map;
+ };
+
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1400000>;
+ no-map;
+ };
+
+ venus_region: venus@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ unknown@fc00000 {
+ reg = <0x0fc00000 0xa00000>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ status = "okay";
firmware-path?
[...]
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
Newline between subnodes, please
[...]
+&smbb {
+ qcom,fast-charge-safe-current = <1750000>;
+ qcom,fast-charge-current-limit = <1750000>;
+ qcom,fast-charge-safe-voltage = <4360000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4300000>;
we had quickcharge in 2013? nice
Konrad
