On Wed, 11 Oct 2023 at 14:56, Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> wrote:
>
>
> On 10/11/2023 5:06 PM, Dmitry Baryshkov wrote:
> > On Wed, 11 Oct 2023 at 14:19, Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> wrote:
> >> Add support for dual lane end point mode PHY found on sa8755p platform.
> >>
> >> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
> >> ---
> >> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 41 ++++++++++++++++++++++++++++++
> >> drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h | 2 ++
> >> 2 files changed, 43 insertions(+)
> > Two minor questions.
> >
> >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> index a63ca74..962b4a1 100644
> >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> @@ -2147,6 +2147,38 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
> >> QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> >> };
> >>
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl[] = {
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BG_TIMER, 0x02),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYS_CLK_CTRL, 0x07),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x27),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x0a),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x17),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x19),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x00),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x03),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x00),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> > I should check whether we miss QSERDES_V5_COM_CMN_MODE in
> > sm8450_qmp_gen4x2_pcie_ep_serdes_tbl, which is otherwise nearly
> > identical.
> > Also do you need to set QSERDES_V5_COM_CORE_CLK_EN here?
> QSERDES_V5_COM_CORE_CLK_EN is common for both RC and EP
> so we are using it in sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl
>
> -Mrinmay
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x04),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0xff),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x09),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x19),
> >> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x28),
> >> +};
> >> +
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl[] = {
> >> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
> >> +};
> > This is the same as sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl
>
> so you want me to use sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl
> instead of creating new one for sa8775?
If you don't see a problem with that, yes.
>
> -Mrinmay
>
> >> +
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl[] = {
> >> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_MX_CTRL7, 0x00),
> >> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_SW_CTRL7, 0x00),
> >> +};
> > Could you please confirm that these registers belong to the V5
> > namespace rather than V5_20 one?
> may I know difference between V5 and V5_20 namespace
> can't we use V5 namespace here?
Register names are different, see existing v5 vs v5.20 and v4 vs v4.20
headers. So, I'd kindly ask to use the appropriate namespace.
>
> -Mrinmay
> >> +
> >> struct qmp_pcie_offsets {
> >> u16 serdes;
> >> u16 pcs;
> >> @@ -3043,6 +3075,15 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
> >> .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
> >> },
> >>
> >> + .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
> >> + .serdes = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
> >> + .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
> >> + .pcs_misc = sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl,
> >> + .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl),
> >> + .pcs = sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
> >> + .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
> >> + },
> >> +
> >> .reset_list = sdm845_pciephy_reset_l,
> >> .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> >> .vreg_list = qmp_phy_vreg_l,
> >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> index 36cc80b..6ee1c33 100644
> >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> @@ -11,6 +11,8 @@
> >> #define QPHY_V5_PCS_PCS_STATUS1 0x014
> >> #define QPHY_V5_PCS_POWER_DOWN_CONTROL 0x040
> >> #define QPHY_V5_PCS_START_CONTROL 0x044
> >> +#define QPHY_V5_PCS_INSIG_SW_CTRL7 0x060
> >> +#define QPHY_V5_PCS_INSIG_MX_CTRL7 0x07c
> >> #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1 0x0c4
> >> #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2 0x0c8
> >> #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3 0x0cc
> >> --
> >> 2.7.4
> >>
> >
--
With best wishes
Dmitry
