Re: [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 11 Oct 2023 at 14:14, Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> wrote:
>
>
> On 10/6/2023 4:24 PM, Shazad Hussain wrote:
> >
> >
> > On 9/22/2023 12:08 AM, Rob Herring wrote:
> >> On Wed, Sep 20, 2023 at 07:25:08PM +0530, Mrinmay Sarkar wrote:
> >>> Add devicetree bindings support for SA8775P SoC.
> >>> Define reg and interrupt per platform.
> >>>
> >>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
> >>> ---
> >>>   .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 130
> >>> +++++++++++++++++----
> >>>   1 file changed, 108 insertions(+), 22 deletions(-)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>> b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>> index a223ce0..e860e8f 100644
> >>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>> @@ -13,6 +13,7 @@ properties:
> >>>     compatible:
> >>>       oneOf:
> >>>         - enum:
> >>> +          - qcom,sa8775p-pcie-ep
> >>>             - qcom,sdx55-pcie-ep
> >>>             - qcom,sm8450-pcie-ep
> >>>         - items:
> >>> @@ -20,29 +21,19 @@ properties:
> >>>             - const: qcom,sdx55-pcie-ep
> >>>       reg:
> >>> -    items:
> >>> -      - description: Qualcomm-specific PARF configuration registers
> >>> -      - description: DesignWare PCIe registers
> >>> -      - description: External local bus interface registers
> >>> -      - description: Address Translation Unit (ATU) registers
> >>> -      - description: Memory region used to map remote RC address space
> >>> -      - description: BAR memory region
> >>> +    minItems: 6
> >>> +    maxItems: 7
> >>>       reg-names:
> >>> -    items:
> >>> -      - const: parf
> >>> -      - const: dbi
> >>> -      - const: elbi
> >>> -      - const: atu
> >>> -      - const: addr_space
> >>> -      - const: mmio
> >>> +    minItems: 6
> >>> +    maxItems: 7
> >>
> >> Don't move these into if/then schemas. Then we are duplicating the
> >> names, and there is no reason to keep them aligned for new compatibles.
> >>
> >> Rob
> >
> > Hi Rob,
> > As we have one extra reg property (dma) required for sa8775p-pcie-ep,
> > isn't it expected to be moved in if/then as per number of regs
> > required. Anyways we would have duplication of some properties for new
> > compatibles where the member numbers differs for a property.
> >
> > Are you suggesting to add the extra reg property (dma) in the existing
> > reg and reg-names list, and add minItems/maxItems for all compatibles
> > present in this file ?

This is what we have been doing in other cases: if the list is an
extension of the current list, there is no need to duplicate it. One
can use min/maxItems instead.

> >
> > -Shazad
>
> Here we have defined reg and interrupt per platform as clocks is defined.
>
> -Mrinmay
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux