Add TCSR register space and refer it from scm node, so that
it can be used by SCM driver.
Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 ++++++
arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index be970472f6c4..76f470a78608 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -671,6 +671,7 @@
firmware {
scm: scm {
compatible = "qcom,scm-sm8250", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
@@ -2543,6 +2544,11 @@
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sm8250-tcsr", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b46236235b7f..0a0d47d7dab1 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -289,6 +289,7 @@
firmware {
scm: scm {
compatible = "qcom,scm-sm8350", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
@@ -1818,6 +1819,11 @@
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sm8350-tcsr", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8350-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0 0x20000>,
--
2.7.4
