Re: [PATCH v5 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 10, 2023 at 03:40:32PM +0200, Konrad Dybcio wrote:
> 
> 
> On 9/30/23 12:21, Robert Marko wrote:
> > From: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > 
> > Add CPU OPP table for IPQ8062, IPQ8064 and IPQ8065 SoC.
> > Use opp-supported-hw binding to correctly enable and disable the
> > frequency as IPQ8062 supports up to 1.0Ghz, IPQ8064 supports up to
> > 1.4GHz with 1.2GHz as an additional frequency and IPQ8065 supports
> > 1.7GHZ but doesn't have 1.2GHZ frequency and has to be disabled.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> Christian/Robert, can you provide a downstream source for this?
> 

Sure, consider that everything is with +/-5%.

Qsdk ships with these values but I will link a more secure source that
is from a very old qsdk source where march-msm was still used instead of
dt.

Here the source [1]. Confirmed by internal verification and also other
qsdk. At first view you might be scared by confusion but...

- _lite = ipq8062
- nothing = ipq8064
- tn_3 = ipq8065

and the psv are both in number and slow, nominal, fast and faster and
they all reflect efuse values.

There is on the left frequency and on the right voltage.

[1] https://github.com/Getnear/R7800/blob/master/git_home/linux.git/sourcecode/arch/arm/mach-msm/acpuclock-ipq806x.c

-- 
	Ansuel



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux