Re: [PATCH v2 1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 02, 2023 at 12:20:21PM +0200, Neil Armstrong wrote:
> On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
> GPIO line for each connector which are set by the PMIC(s).
> 
> Document this optional Type-C connector property, and take the
> assumption an active level represents an inverted/flipped orientation.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> index bceb479f74c5..422921cf1f82 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> @@ -35,6 +35,12 @@ properties:
>    '#size-cells':
>      const: 0
>  
> +  orientation-gpios:
> +    description: Array of input gpios for the Type-C connector orientation indication.
> +      The GPIO indication is used to detect the orientation of the Type-C connector.
> +      The array should contain a gpio entry for each PMIC Glink connector, in reg order.
> +      It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.

Shouldn't this node then have 'orientation-switch'?



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux