Re: [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 5 Oct 2023 at 09:26, Devi Priya <quic_devipriy@xxxxxxxxxxx> wrote:
>
>
>
> On 9/22/2023 5:31 PM, Devi Priya wrote:
> >
> >
> > On 9/20/2023 1:50 PM, Dmitry Baryshkov wrote:
> >> On Wed, 20 Sept 2023 at 09:39, Devi Priya <quic_devipriy@xxxxxxxxxxx>
> >> wrote:
> >>>
> >>>
> >>>
> >>> On 9/12/2023 7:38 PM, Devi Priya wrote:
> >>>>
> >>>>
> >>>> On 8/25/2023 5:14 PM, Dmitry Baryshkov wrote:
> >>>>> On Fri, 25 Aug 2023 at 12:15, Devi Priya <quic_devipriy@xxxxxxxxxxx>
> >>>>> wrote:
> >>>>>>
> >>>>>> Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574
> >>>>>> based
> >>>>>> devices.
> >>>>>>
> >>>>>> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
> >>>>>> ---
> >>>>>>    Changes in V2:
> >>>>>>           - Added depends on ARM64 || COMPILE_TEST in Kconfig
> >>>>>>           - Added module_platform_driver
> >>>>>>           - Dropped patch [2/6] - clk: qcom: gcc-ipq9574: Mark nssnoc
> >>>>>> clocks as critical
> >>>>>>              & added pm_clk for nssnoc clocks
> >>>>>>           - Updated the uniphy clock names
> >>>>>>
> >>>>>>    drivers/clk/qcom/Kconfig         |    7 +
> >>>>>>    drivers/clk/qcom/Makefile        |    1 +
> >>>>>>    drivers/clk/qcom/nsscc-ipq9574.c | 3109
> >>>>>> ++++++++++++++++++++++++++++++
> >>>>>>    3 files changed, 3117 insertions(+)
> >>>>>>    create mode 100644 drivers/clk/qcom/nsscc-ipq9574.c
> >>>>>>
> >>>>>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> >>>>>> index bd9bfb11b328..3ecc11e2c8e3 100644
> >>>>>> --- a/drivers/clk/qcom/Kconfig
> >>>>>> +++ b/drivers/clk/qcom/Kconfig
> >>>>>> @@ -203,6 +203,13 @@ config IPQ_GCC_9574
> >>>>>>             i2c, USB, SD/eMMC, etc. Select this for the root clock
> >>>>>>             of ipq9574.
> >>>>>>
> >>>>>> +config IPQ_NSSCC_9574
> >>>>>> +       tristate "IPQ9574 NSS Clock Controller"
> >>>>>> +       depends on ARM64 || COMPILE_TEST
> >>>>>> +       depends on IPQ_GCC_9574
> >>>>>> +       help
> >>>>>> +         Support for NSS clock controller on ipq9574 devices.
> >>>>>> +
> >>>>>>    config MSM_GCC_8660
> >>>>>>           tristate "MSM8660 Global Clock Controller"
> >>>>>>           depends on ARM || COMPILE_TEST
> >>>>>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> >>>>>> index 4790c8cca426..3f084928962e 100644
> >>>>>> --- a/drivers/clk/qcom/Makefile
> >>>>>> +++ b/drivers/clk/qcom/Makefile
> >>>>>> @@ -30,6 +30,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
> >>>>>>    obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> >>>>>>    obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
> >>>>>>    obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
> >>>>>> +obj-$(CONFIG_IPQ_NSSCC_9574)   += nsscc-ipq9574.o
> >>>>>>    obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
> >>>>>>    obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
> >>>>>>    obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
> >>>>>> diff --git a/drivers/clk/qcom/nsscc-ipq9574.c
> >>>>>> b/drivers/clk/qcom/nsscc-ipq9574.c
> >>>>>> new file mode 100644
> >>>>>> index 000000000000..65bdb449ae5f
> >>>>>> --- /dev/null
> >>>>>> +++ b/drivers/clk/qcom/nsscc-ipq9574.c
> >>>>>> @@ -0,0 +1,3109 @@
> >>>>>> +// SPDX-License-Identifier: GPL-2.0-only
> >>>>>> +/*
> >>>>>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> >>>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
> >>>>>> reserved.
> >>>>>> + */
> >>>>>> +
> >>>>>> +#include <linux/clk-provider.h>
> >>>>>> +#include <linux/err.h>
> >>>>>> +#include <linux/kernel.h>
> >>>>>> +#include <linux/module.h>
> >>>>>> +#include <linux/of.h>
> >>>>>> +#include <linux/of_device.h>
> >>>>>> +#include <linux/regmap.h>
> >>>>>> +#include <linux/pm_clock.h>
> >>>>>> +#include <linux/pm_runtime.h>
> >>>>>> +
> >>>>>> +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
> >>>>>> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
> >>>>>> +
> >>>>>> +#include "clk-alpha-pll.h"
> >>>>>> +#include "clk-branch.h"
> >>>>>> +#include "clk-pll.h"
> >>>>>> +#include "clk-rcg.h"
> >>>>>> +#include "clk-regmap.h"
> >>>>>> +#include "clk-regmap-divider.h"
> >>>>>> +#include "clk-regmap-mux.h"
> >>>>>> +#include "common.h"
> >>>>>> +#include "reset.h"
> >>>>>> +
> >>>>>> +/* Need to match the order of clocks in DT binding */
> >>>>>> +enum {
> >>>>>> +       DT_NSSNOC_NSSCC_CLK,
> >>>>>> +       DT_NSSNOC_SNOC_CLK,
> >>>>>> +       DT_NSSNOC_SNOC_1_CLK,
> >>>>>
> >>>>> Not using the index makes it seem that these clocks are not used,
> >>>>> until one scrolls down to pm_clks.
> >>>> Okay, got it
> >>>>>
> >>>>> BTW: The NSSNOC_SNOC clocks make it look like there is an interconnect
> >>>>> here (not a simple NIU).
> >>>>
> >>>> Hi Dmitry, We are exploring on the ICC driver. In the meantime to
> >>>> unblock PCIe/NSS changes getting merged, shall we use
> >>>> regmap_update_bits
> >>>> and turn on the critical NSSNOC clocks, ANOC & SNOC pcie clocks in the
> >>>> probe function of the gcc driver itself as like sm8550 driver to get
> >>>> the
> >>>> changes merged?
> >>>>
> >>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clk/qcom/gcc-sm8550.c#n3347
> >>>
> >>> Hi Dmitry,
> >>> Just curious to know if we could send out the next series with the
> >>> proposed approach if that holds good.
> >>
> >> The answer really depends on the structure of your hardware. The issue
> >> is that once you commit the device bindings,you have to support them
> >> forever. So, if you commit the NSS clock support without interconnects
> >> in place, you have to keep this ANOC/SNOC/etc code forever, even after
> >> you land the interconnect. So I'd suggest landing the icc driver first
> >> (or at least implementing and sending to the mailing list), so that we
> >> can see how all these pieces fit together.
> >
> > Hi Dmitry,
> > Unlike MSM chipsets, IPQ chipsets does not have any use case wherein the
> > NOC clocks have to be scaled. So if these clocks can be enabled in the
> > probe, there is no need for an interconnect driver at all. The same
> > applies to both ipq9574 and ipq5332 SoCs.
> >
>
> Hi Dmitry,
> Just curious to know if we can go ahead with the proposed solution of
> enabling the NOC clocks in the probe as these clocks need not be scaled
> in IPQ chipsets & hence there would be no need for an ICC driver in
> ipq9574 & ipq5332 targets.

In the probe of which driver?



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux