On 04/10/2023 11:04, Devi Priya wrote:
> Describe the PWM block on IPQ6018.
>
> The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
> &pwm as child of &tcsr.
>
...
> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
>
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index e59b9df96c7e..429ad7cb681c 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -390,8 +390,21 @@ tcsr_mutex: hwlock@1905000 {
> };
>
> tcsr: syscon@1937000 {
> - compatible = "qcom,tcsr-ipq6018", "syscon";
> + compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
> reg = <0x0 0x01937000 0x0 0x21000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x01937000 0x21000>;
Please put ranges just after reg.
With that:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Best regards,
Krzysztof
