[PATCH 6/6] arm64: dts: qcom: ipq5018: Enable PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable the PCIe controller and PHY nodes for RDP 432-c2.

Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index e636a1cb9b77..be7d92700517 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -28,6 +28,15 @@
 	status = "okay";
 };
 
+&pcie_x2 {
+	status = "ok";
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux