[PATCH v3 3/3] arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdx75-idp.dts | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 10d1587..5f2ebe3 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux