Re: [PATCH v5 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 30 Sept 2023 at 13:22, Robert Marko <robimarko@xxxxxxxxx> wrote:
>
> From: Christian Marangi <ansuelsmth@xxxxxxxxx>
>
> Document named opp-microvolt property for opp-v2-kryo-cpu schema.
> This property is used to declare multiple voltage ranges selected on the
> different values read from efuses. The selection is done based on the
> speed pvs values and the named opp-microvolt property is selected by the
> qcom-cpufreq-nvmem driver.
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
> Changes v5:
> * Fix typo in opp items
>
> Changes v4:
> * Address comments from Rob (meaning of pvs, drop of
>   driver specific info, drop of legacy single voltage OPP,
>   better specify max regulators supported)
>
>  .../bindings/opp/opp-v2-kryo-cpu.yaml         | 39 +++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> index 27ea7eca73e5..8d2a47e9a854 100644
> --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> @@ -65,6 +65,12 @@ patternProperties:
>            5:  MSM8996SG, speedbin 1
>            6:  MSM8996SG, speedbin 2
>            7-31:  unused
> +
> +          Bitmap for IPQ806X SoC:
> +          0:  IPQ8062
> +          1:  IPQ8064/IPQ8066/IPQ8068
> +          2:  IPQ8065/IPQ8069
> +          3-31:  unused
>          enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
>                 0x9, 0xd, 0xe, 0xf,
>                 0x10, 0x20, 0x30, 0x70]
> @@ -73,6 +79,23 @@ patternProperties:
>
>        required-opps: true
>
> +    patternProperties:
> +      '^opp-microvolt-speed[0-9]+-pvs[0-9]+$':
> +        description: |
> +          Named opp-microvolt property following the same generic
> +          binding for named opp-microvolt.
> +
> +          The correct voltage range is selected based on the values
> +          in the efuse for the speed and the pvs (power variable
> +          scaling).

I suppose that simple 'true' schema should be enough since this is
already mostly described in opp/opp-v2-base.yaml

> +        minItems: 1
> +        maxItems: 4 # Up to 4 regulators: Core, Mem, Dig and HFPLL
> +        items:
> +          items:
> +            - description: nominal voltage
> +            - description: minimum voltage
> +            - description: maximum voltage
> +
>      required:
>        - opp-hz
>
> @@ -258,6 +281,22 @@ examples:
>              };
>          };
>
> +        /* Dummy opp table to give example for named opp-microvolt */
> +        opp-table-2 {
> +            compatible = "operating-points-v2-kryo-cpu";
> +            nvmem-cells = <&speedbin_efuse>;
> +
> +            opp-384000000 {
> +                opp-hz = /bits/ 64 <384000000>;
> +                opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>;
> +                opp-microvolt-speed0-pvs1 = <925000 878750 971250>;
> +                opp-microvolt-speed0-pvs2 = <875000 831250 918750>;
> +                opp-microvolt-speed0-pvs3 = <800000 760000 840000>;
> +                opp-supported-hw = <0x7>;
> +                clock-latency-ns = <100000>;
> +            };
> +        };
> +
>          smem {
>              compatible = "qcom,smem";
>              memory-region = <&smem_mem>;
> --
> 2.41.0
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux