Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 2, 2023 at 4:15 PM Andrew Halaney <ahalaney@xxxxxxxxxx> wrote:
>
> On Mon, Oct 02, 2023 at 08:24:09AM -0500, Andrew Halaney wrote:
> > On Fri, Sep 29, 2023 at 03:48:37PM -0700, Elliot Berman wrote:
> > > Hi Andrew,
> > >
> > > On 9/29/2023 1:44 PM, Andrew Halaney wrote:
> > > > On Fri, Sep 29, 2023 at 12:22:16PM -0700, Bartosz Golaszewski wrote:
> > > >> On Fri, 29 Sep 2023 21:16:51 +0200, Andrew Halaney <ahalaney@xxxxxxxxxx> said:
> > > >>> On Thu, Sep 28, 2023 at 11:20:35AM +0200, Bartosz Golaszewski wrote:
> > > >>>> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > > >>>>
> > > >>>> Let's use the new SCM memory allocator to obtain a buffer for this call
> > > >>>> instead of using dma_alloc_coherent().
> > > >>>>
> > > >>>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > > >>>> ---
> > > >>>>  drivers/firmware/qcom/qcom_scm.c | 16 +++++-----------
> > > >>>>  1 file changed, 5 insertions(+), 11 deletions(-)
> > > >>>>
> > > >>>> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> > > >>>> index 02a773ba1383..c0eb81069847 100644
> > > >>>> --- a/drivers/firmware/qcom/qcom_scm.c
> > > >>>> +++ b/drivers/firmware/qcom/qcom_scm.c
> > > >>>> @@ -532,7 +532,7 @@ static void qcom_scm_set_download_mode(bool enable)
> > > >>>>  int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
> > > >>>>                            struct qcom_scm_pas_metadata *ctx)
> > > >>>>  {
> > > >>>> -      dma_addr_t mdata_phys;
> > > >>>> +      phys_addr_t mdata_phys;
> > > >>>
> > > >>>>        void *mdata_buf;
> > > >>>>        int ret;
> > > >>>>        struct qcom_scm_desc desc = {
> > > >>>> @@ -544,13 +544,7 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
> > > >>>>        };
> > > >>>>        struct qcom_scm_res res;
> > > >>>>
> > > >>>> -      /*
> > > >>>> -       * During the scm call memory protection will be enabled for the meta
> > > >>>> -       * data blob, so make sure it's physically contiguous, 4K aligned and
> > > >>>> -       * non-cachable to avoid XPU violations.
> > > >>>> -       */
> > > >>>> -      mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
> > > >>>> -                                     GFP_KERNEL);
> > > >>>> +      mdata_buf = qcom_scm_mem_alloc(size, GFP_KERNEL);
> > > >>>
> > > >>> mdata_phys is never initialized now, and its what's being shoved into
> > > >>> desc.args[1] later, which I believe is what triggered the -EINVAL
> > > >>> with qcom_scm_call() that I reported in my cover letter reply this
> > > >>> morning.
> > > >>>
> > > >>> Prior with the DMA API that would have been the device view of the buffer.
> > > >>>
> > > >>
> > > >> Gah! Thanks for finding this.
> > > >>
> > > >> Can you try the following diff?
> > > >>
> > > >> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> > > >> index 794388c3212f..b0d4ea237034 100644
> > > >> --- a/drivers/firmware/qcom/qcom_scm.c
> > > >> +++ b/drivers/firmware/qcom/qcom_scm.c
> > > >> @@ -556,6 +556,7 @@ int qcom_scm_pas_init_image(u32 peripheral, const
> > > >> void *metadata, size_t size,
> > > >>                  dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
> > > >>                  return -ENOMEM;
> > > >>          }
> > > >> +        mdata_phys = qcom_scm_mem_to_phys(mdata_buf);
> > > >>          memcpy(mdata_buf, metadata, size);
> > > >>
> > > >>          ret = qcom_scm_clk_enable();
> > > >> @@ -578,7 +579,7 @@ int qcom_scm_pas_init_image(u32 peripheral, const
> > > >> void *metadata, size_t size,
> > > >>                  qcom_scm_mem_free(mdata_buf);
> > > >>          } else if (ctx) {
> > > >>                  ctx->ptr = mdata_buf;
> > > >> -                ctx->phys = qcom_scm_mem_to_phys(mdata_buf);
> > > >> +                ctx->phys = mdata_phys;
> > > >>                  ctx->size = size;
> > > >>          }
> > > >>
> > > >> Bart
> > > >>
> > > >
> > > > For some reason that I can't explain that is still not working. It seems
> > > > the SMC call is returning !0 and then we return -EINVAL from there
> > > > with qcom_scm_remap_error().
> > > >
> > > > Here's a really crummy diff of what I hacked in during lunch to debug (don't
> > > > judge my primitive debug skills):
> > > >
> > >
> > > I don't know what you're talking about :-)
> > >
> > > > diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c
> > > > index 0d5554df1321..56eab0ae5f3a 100644
> > > > --- a/drivers/firmware/qcom/qcom_scm-smc.c
> > > > +++ b/drivers/firmware/qcom/qcom_scm-smc.c
> > > > @@ -162,6 +162,8 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
> > > >         struct arm_smccc_res smc_res;
> > > >         struct arm_smccc_args smc = {0};
> > > >
> > > > +       dev_err(dev, "%s: %d: We are in this function\n", __func__, __LINE__);
> > > > +
> > > >         smc.args[0] = ARM_SMCCC_CALL_VAL(
> > > >                 smccc_call_type,
> > > >                 qcom_smccc_convention,
> > > > @@ -174,6 +176,7 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
> > > >         if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) {
> > > >                 alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64);
> > > >                 args_virt = qcom_scm_mem_alloc(PAGE_ALIGN(alloc_len), flag);
> > > > +               dev_err(dev, "%s: %d: Hit the unlikely case!\n", __func__, __LINE__);
> > > >
> > > >                 if (!args_virt)
> > > >                         return -ENOMEM;
> > > > @@ -197,6 +200,7 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
> > > >
> > > >         /* ret error check follows after args_virt cleanup*/
> > > >         ret = __scm_smc_do(dev, &smc, &smc_res, atomic);
> > > > +       dev_err(dev, "%s: %d: ret: %d\n", __func__, __LINE__, ret);
> > > >
> > > >         if (ret)
> > > >                 return ret;
> > > > @@ -205,8 +209,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
> > > >                 res->result[0] = smc_res.a1;
> > > >                 res->result[1] = smc_res.a2;
> > > >                 res->result[2] = smc_res.a3;
> > > > +               dev_err(dev, "%s: %d: 0: %llu, 1: %llu: 2: %llu\n", __func__, __LINE__, res->result[0], res->result[1], res->result[2]);
> > > >         }
> > > >
> > > > +       dev_err(dev, "%s: %d: smc_res.a0: %lu\n", __func__, __LINE__, smc_res.a0);
> > > >         return (long)smc_res.a0 ? qcom_scm_remap_error(smc_res.a0) : 0;
> > > >
> > > >
> > > > And that all spams dmesg successfully for most cases, but the
> > > > pas_init_image calls log this out:
> > > >
> > > > [   16.362965] remoteproc remoteproc1: powering up 1b300000.remoteproc
> > > > [   16.364897] remoteproc remoteproc1: Booting fw image qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn, size 3575808
> > > > [   16.365009] qcom_scm firmware:scm: __scm_smc_call: 165: We are in this function
> > > > [   16.365251] qcom_scm firmware:scm: __scm_smc_call: 203: ret: 0
> > > > [   16.365256] qcom_scm firmware:scm: __scm_smc_call: 212: 0: 0, 1: 0: 2: 0
> > > > [   16.365261] qcom_scm firmware:scm: __scm_smc_call: 215: smc_res.a0: 4291821558
> > > >
> > > > At the moment I am unsure why...
> > > >
> > > Does the issue appear right after taking patch 6 or does it only appear after taking
> > > the whole series? If it's just to this patch, then maybe something wrong with
> > > the refactor: shm bridge isn't enabled at this point in the series.
> > >
> >
> > I've only been testing the series as a whole on top of a 6.6 based
> > branch, I'm going to try and test some more today to see if just the
> > allocator bits (but not the SHM bridge enablement) works alright for
> > me.
> >
>
> After testing a little more with the fix Bart sent above,
> the allocator refactor seems to work well.
> With "firmware: qcom: scm: enable SHM bridge" applied is when I see the
> errors I pointed out above. All prior patches cause no problems on boot
> for me.
>
> For patches 1-9 (with the fix sent here for patch 6) please feel free
> to add:
>
>     Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sc8280xp-lenovo-thinkpad-x13s
>
> If anyone has suggestions for debugging why the switch to using
> SHM bridge is breaking firmware loading for me, I'm willing to give
> that a try.
>

Is it possible that sc8280xp doesn't support SHM bridge but for some
reason __qcom_scm_is_call_available() returns true when checking if it
does?

That's the only thing that comes to my mind ATM.

Bart




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux