Re: [RFC PATCH 1/3] drm/msm/dpu: add support for MSM8953

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 29 Sept 2023 at 23:53, Luca Weiss <luca@xxxxxxxxx> wrote:
>
> On Samstag, 23. September 2023 23:49:10 CEST Dmitry Baryshkov wrote:
> > Experimental support for MSM8953, which has MDP5 v1.16. It looks like
> > trimmed down version of MSM8996. Less SSPP, LM and PP blocks. No DSC,
> > etc.
> >
>
> Hi Dmitry,
>
> As written on IRC, on sdm632-fairphone-fp3 with this DPU patches the screen is
> initializing and displaying stuff :) But there's some errors, which presumably
> are the reason that the screen is only updating a few times per second.
>
> [   22.774205] [drm:dpu_kms_hw_init:1164] dpu hardware revision:0x10100000
> [   23.099806] [drm:_dpu_encoder_phys_cmd_wait_for_ctl_start:657] [dpu error]enc31 intf1 ctl start interrupt wait failed
> [   23.099821] [drm:dpu_kms_wait_for_commit_done:495] [dpu error]wait for commit done returned -22
>
> These messages appear about 13 times per second but as I mentioned, the screen
> *is* updating (slowly) there.

Thank you for the testing, I'll see if I can determine what is causing
the ctl start issue.

>
> Also you for sure forgot to add "qcom,msm8953-mdp5" to the
> msm_mdp5_dpu_migration list, without this DPU is never even considered for
> 8953.

Yep.

>
> Regards
> Luca


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux