[PATCH 0/2] 8280 display ahb clk fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Little fixes to shut down disp ahb clk when dispss is not in use.

If possible, the dt patch should theoretically go in first, but x13s
worked fine regardless.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad Dybcio (2):
      arm64: dts: qcom: sc8280xp: Use the correct AHB clock for DISPSS1
      clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
 drivers/clk/qcom/gcc-sc8280xp.c        | 6 ++----
 2 files changed, 4 insertions(+), 6 deletions(-)
base-commit: df964ce9ef9fea10cf131bf6bad8658fde7956f6
change-id: 20230929-topic-8280_ahbdisp-e170e0ca2442

Best regards,
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux