Add thermal zones, tsens and qfprom nodes
Cc: Andy Gross <agross@xxxxxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0554fbd..80570a1 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -75,6 +75,88 @@
};
};
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu_alert0: trip@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip@1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu_alert1: trip@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip@1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu_alert2: trip@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit2: trip@1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu_alert3: trip@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit3: trip@1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 7 0xf04>;
@@ -103,6 +185,29 @@
<0xf9002000 0x1000>;
};
+ qfprom: qfprom@fc4bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,qfprom";
+ reg = <0xfc4bc000 0x1000>;
+ tsens_calib: calib@d0 {
+ reg = <0xd0 0x18>;
+ };
+ tsens_backup: backup@440 {
+ reg = <0x440 0x10>;
+ };
+ };
+
+ tsens: thermal-sensor@fc4a8000 {
+ compatible = "qcom,msm8974-tsens";
+ reg = <0xfc4a8000 0x2000>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200
+ 3200 3200 3200 3200 3200>;
+ #thermal-sensor-cells = <1>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
