Add the USB3+DP Combo QMP PHY port subnodes in the SC7280 SoC DTSI to
avoid duplication in the devices DTs.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..4e34d00e246b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3399,6 +3399,32 @@ usb_1_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
usb_2: usb@8cf8800 {
---
base-commit: df964ce9ef9fea10cf131bf6bad8658fde7956f6
change-id: 20230929-sc7280-qmpphy-ports-20afd4212470
Best regards,
--
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
