On 9/28/2023 2:20 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Extens the SCM memory allocator with using the SHM Bridge feature if
> available on the platform. This makes the trustzone only use dedicated
> buffers for SCM calls. We map the entire SCM genpool as a bridge.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> drivers/firmware/qcom/qcom_scm-mem.c | 42 ++++++++++++++++++++++++++--
> 1 file changed, 39 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/firmware/qcom/qcom_scm-mem.c b/drivers/firmware/qcom/qcom_scm-mem.c
> index eafecbe23770..12b12b15f46f 100644
> --- a/drivers/firmware/qcom/qcom_scm-mem.c
> +++ b/drivers/firmware/qcom/qcom_scm-mem.c
> @@ -16,6 +16,8 @@
>
> #include "qcom_scm.h"
>
> +#define QCOM_SHM_BRIDGE_NUM_VM_SHIFT 9
> +
> static size_t qcom_scm_mem_pool_size = SZ_2M;
> module_param_named(qcom_scm_mem_pool_size, qcom_scm_mem_pool_size,
> ulong, 0400);
> @@ -108,8 +110,24 @@ phys_addr_t qcom_scm_mem_to_phys(void *vaddr)
> return chunk->paddr;
> }
>
> +static int qcom_scm_mem_shm_bridge_create(void)
> +{
> + uint64_t pfn_and_ns_perm, ipfn_and_s_perm, size_and_flags, ns_perms;
> +
> + ns_perms = (QCOM_SCM_PERM_WRITE | QCOM_SCM_PERM_READ);
> + pfn_and_ns_perm = (u64)qcom_scm_mem.pbase | ns_perms;
> + ipfn_and_s_perm = (u64)qcom_scm_mem.pbase | ns_perms;
> + size_and_flags = qcom_scm_mem.size | (1 << QCOM_SHM_BRIDGE_NUM_VM_SHIFT);
> +
> + return qcom_scm_create_shm_bridge(qcom_scm_mem.dev, pfn_and_ns_perm,
> + ipfn_and_s_perm, size_and_flags,
> + QCOM_SCM_VMID_HLOS);
> +}
> +
> int qcom_scm_mem_enable(struct device *dev)
> {
> + int ret;
> +
> INIT_RADIX_TREE(&qcom_scm_mem.chunks, GFP_ATOMIC);
> spin_lock_init(&qcom_scm_mem.lock);
> qcom_scm_mem.dev = dev;
> @@ -128,7 +146,25 @@ int qcom_scm_mem_enable(struct device *dev)
>
> gen_pool_set_algo(qcom_scm_mem.pool, gen_pool_best_fit, NULL);
>
> - return gen_pool_add_virt(qcom_scm_mem.pool,
> - (unsigned long)qcom_scm_mem.vbase,
> - qcom_scm_mem.pbase, qcom_scm_mem.size, -1);
> + ret = gen_pool_add_virt(qcom_scm_mem.pool,
> + (unsigned long)qcom_scm_mem.vbase,
> + qcom_scm_mem.pbase, qcom_scm_mem.size, -1);
> + if (ret)
> + return ret;
> +
> + ret = qcom_scm_enable_shm_bridge();
> + if (ret) {
> + if (ret == EOPNOTSUPP)
> + dev_info(dev, "SHM Bridge not supported\n");
> + else
> + return ret;
> + } else {
> + ret = qcom_scm_mem_shm_bridge_create();
> + if (ret)
> + return ret;
> +
> + dev_info(dev, "SHM Bridge enabled\n");
Do you need to add clean up (deletion) of the SHM bridge on driver remove?
One easy approach I could think: implemnet devm_qcom_scm_mem_shm_bridge_create
which calls qcom_scm_delete_shm_bridge on the clean up
(qcom_scm_delete_shm_bridge implemented in downstream, not in this series).
> + }
> +
> + return 0;
> }
