The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 8 ++++++++
arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts | 8 ++++++++
arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts | 8 ++++++++
.../boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 ++++++++
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 4 ----
5 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 0e80a5a8e3c6..b820f3255c16 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -185,6 +185,14 @@ &mdp_dsi1_out {
remote-endpoint = <&dsi0_in>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8addb7..c01254b1a3a7 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -69,6 +69,14 @@ &pcie {
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index 96307550523a..f1bd29333c9b 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -171,6 +171,14 @@ &pcie {
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74d1..7917f1657025 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -65,6 +65,14 @@ &gsbi5_serial {
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 6514d728b1ec..76796002bda6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -662,8 +662,6 @@ ssbi@c00000 {
pm8821: pmic {
compatible = "qcom,pm8821";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
@@ -688,8 +686,6 @@ ssbi@500000 {
pm8921: pmic {
compatible = "qcom,pm8921";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <74 8>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
--
2.39.2
