The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.
Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++++
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 4 ++++
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 2 --
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 48fd1a1feea3..e4261d729d35 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -273,6 +273,10 @@ kxsd9@18 {
};
};
+&pm8058 {
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8058_gpio {
dragon_ethernet_gpios: ethernet-state {
pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index 86fbb6dfdc2a..a5441aecd637 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -34,6 +34,10 @@ &gsbi12_serial {
status = "okay";
};
+&pm8058 {
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8058_keypad {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_FN_F1)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 9217ced108c4..84b0366792d4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -341,8 +341,6 @@ ssbi@500000 {
pm8058: pmic {
compatible = "qcom,pm8058";
- interrupt-parent = <&tlmm>;
- interrupts = <88 8>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
--
2.39.2
