[PATCH v3 2/3] phy: qcom-qmp-usb: move PCS v6 register to the proper header

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The commit 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register
offsets") incorrectly added plain PCS registers to the PCS_USB header.
Move them to a proper location.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 16 ----------------
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h     | 16 ++++++++++++++--
 2 files changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
index cf4464849006..7c16af0b1cc3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -7,22 +7,6 @@
 #define QCOM_PHY_QMP_PCS_USB_V6_H_
 
 /* Only for QMP V6 PHY - USB3 have different offsets than V5 */
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG1		0xc4
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG2		0xc8
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3		0xcc
-#define QPHY_V6_PCS_LOCK_DETECT_CONFIG6		0xd8
-#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
-#define QPHY_V6_PCS_POWER_STATE_CONFIG1		0x90
-#define QPHY_V6_PCS_RX_SIGDET_LVL			0x188
-#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L		0x190
-#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H		0x194
-#define QPHY_V6_PCS_CDR_RESET_TIME			0x1b0
-#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG1		0x1c0
-#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG2		0x1c4
-#define QPHY_V6_PCS_PCS_TX_RX_CONFIG		0x1d0
-#define QPHY_V6_PCS_EQ_CONFIG1			0x1dc
-#define QPHY_V6_PCS_EQ_CONFIG5			0x1ec
-
 #define QPHY_V6_PCS_USB3_POWER_STATE_CONFIG1		0x00
 #define QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x18
 #define QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x3c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
index 18c4a3abe590..47cedb860fef 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -7,10 +7,22 @@
 #define QCOM_PHY_QMP_PCS_V6_H_
 
 /* Only for QMP V6 PHY - USB/PCIe PCS registers */
-#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
+#define QPHY_V6_PCS_POWER_STATE_CONFIG1		0x090
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG1		0x0c4
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG2		0x0c8
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3		0x0cc
+#define QPHY_V6_PCS_LOCK_DETECT_CONFIG6		0x0d8
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1		0x0dc
 #define QPHY_V6_PCS_RX_SIGDET_LVL		0x188
+#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L	0x190
+#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H	0x194
 #define QPHY_V6_PCS_RATE_SLEW_CNTRL1		0x198
-#define QPHY_V6_PCS_EQ_CONFIG2			0x1e0
+#define QPHY_V6_PCS_CDR_RESET_TIME		0x1b0
+#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG1	0x1c0
+#define QPHY_V6_PCS_ALIGN_DETECT_CONFIG2	0x1c4
 #define QPHY_V6_PCS_PCS_TX_RX_CONFIG		0x1d0
+#define QPHY_V6_PCS_EQ_CONFIG1			0x1dc
+#define QPHY_V6_PCS_EQ_CONFIG2			0x1e0
+#define QPHY_V6_PCS_EQ_CONFIG5			0x1ec
 
 #endif
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux