On Wed, 27 Sept 2023 at 23:54, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
> Currently DP driver is executed independent of PM runtime framework.
> This lead to msm edp panel can not be detected by edp_panel driver at
> generic_edp_panel_probe() due to aux dpcd read failed at msm edp driver.
eDP, AUX, DPCD. leads. not being detected, s/at/during.
Also there is no msm eDP driver.
> Incorporating pm runtime framework into DP driver so that both power and
Incorporate. PM
> clocks to enable/disable host controller fits with PM runtime mechanism.
Ugh?
> Once pm runtime framework is incorporated into DP driver, wake up device
waking
> from power up path is not necessary. Hence remove it.
> Since DP is part of user interface, we choice to use autosuspend feature
> with timer of one second. pm runtime suspends is prevented from happening
> until timer expired.
No, this is not the right reason to use autosuspend. Please use normal
suspend unless there is a performance regression caused by the
suspend/resume paths.
>
> Changes in v4:
> -- reworded commit text to explain why pm_framework is required for edp panel
> -- reworded commit text to explain autosuspend is choiced
> -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3
> -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3
> -- return value from pm_runtime_resume_and_get() directly
> -- check return value of devm_pm_runtime_enable()
> -- delete pm_runtime_xxx from dp_display_remove()
> -- drop dp_display_host_init() from EV_HPD_INIT_SETUP
>
> Changes in v3:
> -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
> -- use pm_runtime_resume_and_get() instead of pm_runtime_get()
> -- error checking pm_runtime_resume_and_get() return value
> -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dp/dp_aux.c | 6 +++
> drivers/gpu/drm/msm/dp/dp_display.c | 95 +++++++++++++++++++++++++++----------
> drivers/gpu/drm/msm/dp/dp_power.c | 16 -------
> drivers/gpu/drm/msm/dp/dp_power.h | 11 -----
> 4 files changed, 77 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 8e3b677..22eb774 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
> return -EINVAL;
> }
>
> + ret = pm_runtime_resume_and_get(dp_aux->dev);
> + if (ret)
> + return ret;
> +
> mutex_lock(&aux->mutex);
> if (!aux->initted) {
> ret = -EIO;
> @@ -364,6 +368,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>
> exit:
> mutex_unlock(&aux->mutex);
> + pm_runtime_mark_last_busy(dp_aux->dev);
> + pm_runtime_put_autosuspend(dp_aux->dev);
>
> return ret;
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 3ef141c..bfb4692 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -276,8 +276,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
> dp->dp_display.drm_dev = drm;
> priv->dp[dp->id] = &dp->dp_display;
>
> -
> -
Is this also a part of pm_runtime support? No, it is not.
> dp->drm_dev = drm;
> dp->aux->drm_dev = drm;
> rc = dp_aux_register(dp->aux);
> @@ -286,7 +284,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
> goto end;
> }
>
> -
And this. If you want to clean up stray empty lines, please split that
to a separate patch.
> rc = dp_register_audio_driver(dev, dp->audio);
> if (rc) {
> DRM_ERROR("Audio registration Dp failed\n");
> @@ -310,15 +307,10 @@ static void dp_display_unbind(struct device *dev, struct device *master,
> struct dp_display_private *dp = dev_get_dp_display_private(dev);
> struct msm_drm_private *priv = dev_get_drvdata(master);
>
> - /* disable all HPD interrupts */
> - if (dp->core_initialized)
> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
> -
> kthread_stop(dp->ev_tsk);
>
> of_dp_aux_depopulate_bus(dp->aux);
>
> - dp_power_client_deinit(dp->power);
> dp_unregister_audio_driver(dev, dp->audio);
> dp_aux_unregister(dp->aux);
> dp->drm_dev = NULL;
> @@ -460,6 +452,16 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
> static int dp_display_usbpd_configure_cb(struct device *dev)
> {
> struct dp_display_private *dp = dev_get_dp_display_private(dev);
> + int ret;
> +
> + if (!dp->dp_display.internal_hpd) {
I'd say, drop the condition here.
> + /* hpd through gpio */
Why? !internal_hpd means any possible way of delivering an HPD event.
For example, via the USB-C TCPM.
> + ret = pm_runtime_resume_and_get(&dp->pdev->dev);
Which function contains corresponding pm_runtime_put()?
> + if (ret) {
> + DRM_ERROR("failed to start power\n");
failed to resume
> + return ret;
> + }
> + }
>
> dp_display_host_phy_init(dp);
>
> @@ -1086,7 +1088,6 @@ static int hpd_event_thread(void *data)
>
> switch (todo->event_id) {
> case EV_HPD_INIT_SETUP:
> - dp_display_host_init(dp_priv);
> break;
> case EV_HPD_PLUG_INT:
> dp_hpd_plug_handle(dp_priv, todo->data);
> @@ -1263,6 +1264,13 @@ static int dp_display_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, &dp->dp_display);
>
> + rc = devm_pm_runtime_enable(&pdev->dev);
> + if (rc)
> + return rc;
Missing submodules deinit.
> +
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> rc = dp_display_request_irq(dp);
> if (rc)
> return rc;
> @@ -1285,6 +1293,34 @@ static int dp_display_remove(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, NULL);
>
> + dp_display_deinit_sub_modules(dp);
There is already a call to dp_display_deinit_sub_modules() in
dp_display_remove().
> +
> + return 0;
> +}
> +
> +static int dp_pm_runtime_suspend(struct device *dev)
> +{
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
> +
> + if (dp->dp_display.is_edp) {
> + dp_display_host_phy_exit(dp);
> + dp_catalog_ctrl_hpd_disable(dp->catalog);
> + }
I don't see where this code was removed.
> + dp_display_host_deinit(dp);
> +
> + return 0;
> +}
> +
> +static int dp_pm_runtime_resume(struct device *dev)
> +{
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
> +
> + dp_display_host_init(dp);
> + if (dp->dp_display.is_edp) {
> + dp_catalog_ctrl_hpd_enable(dp->catalog);
> + dp_display_host_phy_init(dp);
> + }
> +
> return 0;
> }
>
> @@ -1389,6 +1425,7 @@ static int dp_pm_suspend(struct device *dev)
> }
>
> static const struct dev_pm_ops dp_pm_ops = {
> + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
> .suspend = dp_pm_suspend,
> .resume = dp_pm_resume,
> };
> @@ -1473,10 +1510,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
> aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>
> if (aux_bus && dp->is_edp) {
> - dp_display_host_init(dp_priv);
> - dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
> - dp_display_host_phy_init(dp_priv);
> -
> /*
> * The code below assumes that the panel will finish probing
> * by the time devm_of_dp_aux_populate_ep_devices() returns.
> @@ -1578,6 +1611,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
> dp_hpd_plug_handle(dp_display, 0);
>
> mutex_lock(&dp_display->event_mutex);
> + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
> + DRM_ERROR("failed to start power\n");
failed to resume.
> + mutex_unlock(&dp_display->event_mutex);
> + return;
> + }
>
> state = dp_display->hpd_state;
> if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
> @@ -1642,10 +1680,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> mutex_lock(&dp_display->event_mutex);
>
> state = dp_display->hpd_state;
> - if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) {
> - mutex_unlock(&dp_display->event_mutex);
> - return;
> - }
> + if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED)
> + drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n",
> + dp->connector_type, state);
>
> dp_display_disable(dp_display);
>
> @@ -1658,6 +1695,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> }
>
> drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
> +
> + pm_runtime_mark_last_busy(&dp_display->pdev->dev);
> + pm_runtime_put_autosuspend(&dp_display->pdev->dev);
> mutex_unlock(&dp_display->event_mutex);
> }
>
> @@ -1697,6 +1737,12 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
>
> mutex_lock(&dp->event_mutex);
> + if (pm_runtime_resume_and_get(&dp->pdev->dev)) {
> + DRM_ERROR("failed to start power\n");
> + mutex_unlock(&dp->event_mutex);
> + return;
> + }
> +
> dp_catalog_ctrl_hpd_enable(dp->catalog);
>
> /* enable HDP interrupts */
> @@ -1718,6 +1764,9 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> dp_catalog_ctrl_hpd_disable(dp->catalog);
>
> dp_display->internal_hpd = false;
> +
> + pm_runtime_mark_last_busy(&dp->pdev->dev);
> + pm_runtime_put_autosuspend(&dp->pdev->dev);
> mutex_unlock(&dp->event_mutex);
> }
>
> @@ -1732,13 +1781,11 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> if (dp_display->internal_hpd)
> return;
>
> - if (!dp->core_initialized) {
> - drm_dbg_dp(dp->drm_dev, "not initialized\n");
> - return;
> - }
> -
> - if (!dp_display->link_ready && status == connector_status_connected)
> + /* hpd through gpio */
Lack of the comment might be better than the incorrect comment.
> + if (!dp_display->link_ready && status == connector_status_connected) {
> + dp->hpd_state = ST_DISCONNECTED;
Is this also a part of pm_runtime support?
> dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> - else if (dp_display->link_ready && status == connector_status_disconnected)
> + } else if (dp_display->link_ready && status == connector_status_disconnected) {
> dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> + }
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> index 5cb84ca..863c766 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.c
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -152,20 +152,9 @@ int dp_power_client_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_enable(power->dev);
> -
> return dp_power_clk_init(power);
> }
>
> -void dp_power_client_deinit(struct dp_power *dp_power)
> -{
> - struct dp_power_private *power;
> -
> - power = container_of(dp_power, struct dp_power_private, dp_power);
> -
> - pm_runtime_disable(power->dev);
> -}
> -
> int dp_power_init(struct dp_power *dp_power)
> {
> int rc = 0;
> @@ -173,11 +162,7 @@ int dp_power_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_get_sync(power->dev);
> -
> rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> - if (rc)
> - pm_runtime_put_sync(power->dev);
>
> return rc;
> }
> @@ -189,7 +174,6 @@ int dp_power_deinit(struct dp_power *dp_power)
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> - pm_runtime_put_sync(power->dev);
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
> index a3dec20..55ada51 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.h
> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
> @@ -81,17 +81,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
> int dp_power_client_init(struct dp_power *power);
>
> /**
> - * dp_power_clinet_deinit() - de-initialize clock and regulator modules
> - *
> - * @power: instance of power module
> - * return: 0 for success, error for failure.
> - *
> - * This API will de-initialize the DisplayPort's clocks and regulator
> - * modules.
> - */
> -void dp_power_client_deinit(struct dp_power *power);
> -
> -/**
> * dp_power_get() - configure and get the DisplayPort power module data
> *
> * @parser: instance of parser module
> --
> 2.7.4
>
--
With best wishes
Dmitry
