[PATCH v8 38/53] media: usb: airspy: Set min_buffers_needed to 8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



vb2 queue_setup checks for a minimum number of buffers so set
min_buffers_needed to 8 and remove the useless check in
airspy_queue_setup().

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
---
 drivers/media/usb/airspy/airspy.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c
index 462eb8423506..56bc1b23d39b 100644
--- a/drivers/media/usb/airspy/airspy.c
+++ b/drivers/media/usb/airspy/airspy.c
@@ -483,15 +483,10 @@ static int airspy_queue_setup(struct vb2_queue *vq,
 {
 	struct airspy *s = vb2_get_drv_priv(vq);
 
-	dev_dbg(s->dev, "nbuffers=%d\n", *nbuffers);
-
-	/* Need at least 8 buffers */
-	if (vq->num_buffers + *nbuffers < 8)
-		*nbuffers = 8 - vq->num_buffers;
 	*nplanes = 1;
 	sizes[0] = PAGE_ALIGN(s->buffersize);
 
-	dev_dbg(s->dev, "nbuffers=%d sizes[0]=%d\n", *nbuffers, sizes[0]);
+	dev_dbg(s->dev, "nbuffers=%d sizes[0]=%d\n", vb2_get_num_buffers(vq), sizes[0]);
 	return 0;
 }
 
@@ -1011,6 +1006,8 @@ static int airspy_probe(struct usb_interface *intf,
 	/* Init videobuf2 queue structure */
 	s->vb_queue.type = V4L2_BUF_TYPE_SDR_CAPTURE;
 	s->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+	/* Need at least 8 buffers */
+	s->vb_queue.min_buffers_needed = 8;
 	s->vb_queue.drv_priv = s;
 	s->vb_queue.buf_struct_size = sizeof(struct airspy_frame_buf);
 	s->vb_queue.ops = &airspy_vb2_ops;
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux