Re: [PATCH v2 08/11] arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14.09.2023 08:59, Kathiravan Thirumoorthy wrote:
> While the kernel is booting up, APSS PLL will be running at 800MHz with
> GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
> configured to the rate based on the opp table and the source also will
> be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
> with this inclusion, CPU Freq correctly reports that CPU is running at
> 800MHz rather than 24MHz.
> 
> Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux