On 9/27/2023 12:01 AM, Konrad Dybcio wrote:
On 26.09.2023 18:20, Nitin Rawat wrote:Add UFS host controller and PHY nodes for sc7280 soc. Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 64 ++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 66f1eb83cca7..3be8ea090ade 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3353,6 +3353,70 @@ }; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk";As discussed, property-names is preferred to come after property, just like in the other node you're adding.
Sure. Updated this in latest patchset and updated the binding as well.
[...]+ ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + + };Stray newline above.
Removed this in latest Patchset
Konrad
Thanks, Nitin
