Re: [PATCH 05/13] arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26.09.2023 18:51, Stephan Gerhold wrote:
> Enable sound and modem for the Samsung S4 Mini Value Edition. The setup
> is similar to most MSM8916 devices, i.e.:
> 
>  - QDSP6 audio
>  - Speaker/earpiece/headphones/microphones via digital/analog codec in
>    MSM8916/PM8916
>  - WWAN Internet via BAM-DMUX
> 
> except:
> 
>  - Samsung-specific audio jack detection (not supported yet)
> 
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> index 68da2a2d3077..5f33aa0ad7b5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> @@ -6,6 +6,8 @@
>  /dts-v1/;
>  
>  #include "msm8916-pm8916.dtsi"
> +#include "msm8916-modem-qdsp6.dtsi"
> +
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> @@ -319,6 +321,10 @@ &blsp_uart2 {
>  	status = "okay";
>  };
>  
> +&mpss_mem {
> +	reg = <0x0 0x86800000 0x0 0x5a00000>;
> +};
> +
>  &pm8916_resin {
>  	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> @@ -350,6 +356,14 @@ &sdhc_2 {
>  	no-1-8-v;
>  };
>  
> +&sound {
> +	status = "okay";
> +	audio-routing =
> +		"AMIC1", "MIC BIAS External1",
> +		"AMIC2", "MIC BIAS Internal2",
> +		"AMIC3", "MIC BIAS External1";
> +};
I *think* we should be able to harmlessly enable &audio globally?

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux