[PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding compatible string in TSENS dt-bindings, device node
for TSENS controller and Thermal zone support

Changes since v3:
- Correct the unit address of tsens node
- Updated tsens nodes in sorted order by address
- Moved thermal zones outside /soc node

Changes since v2:
- Indentation mistakes are resolved
- Updated offset of tsens srot region in reg property
- Updated tsens reg property cells properly


Priyansh Jain (2):
  dt-bindings: thermal: tsens: Add sa8775p compatible
  arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC

 .../bindings/thermal/qcom-tsens.yaml          |    1 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 1096 +++++++++++++++++
 2 files changed, 1097 insertions(+)

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux