On 25/09/2023 08:59, Devi Priya wrote:
> Describe the PWM block on IPQ6018.
>
> The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
> &pwm as child of &tcsr.
>
> Add also ipq6018 specific compatible string.
>
> Co-developed-by: Baruch Siach <baruch.siach@xxxxxxxxx>
> Signed-off-by: Baruch Siach <baruch.siach@xxxxxxxxx>
> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
> ---
> v12:
>
> No change
>
> v11:
>
> No change
>
> v10:
>
> No change
>
> v9:
>
> Add 'ranges' property (Rob)
>
> v8:
>
> Add size cell to 'reg' (Rob)
>
> v7:
>
> Use 'reg' instead of 'offset' (Rob)
>
> Add qcom,tcsr-ipq6018 (Rob)
>
> Drop clock-names (Bjorn)
>
> v6:
>
> Make the PWM node child of TCSR (Rob Herring)
>
> Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
>
> v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
>
> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
>
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 47b8b1d6730a..cadd2c583526 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -398,8 +398,21 @@ tcsr_mutex: hwlock@1905000 {
> };
>
> tcsr: syscon@1937000 {
> - compatible = "qcom,tcsr-ipq6018", "syscon";
> + compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Best regards,
Krzysztof
