The SDX65 GCC clock controller expects two required clocks:
pcie_pipe_clk and usb3_phy_wrapper_gcc_usb30_pipe_clk. The first one is
provided by existing phy node, but second is not yet implemented.
qcom-sdx65-mtp.dtb: clock-controller@100000: clocks: [[11, 0], [11, 1], [12]] is too short
qcom-sdx65-mtp.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too short
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index c9790217320b..4a8cc28fa1db 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@ soc: soc {
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdx65";
reg = <0x00100000 0x001f7400>;
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
- clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <&pcie_phy>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "sleep_clk",
+ "pcie_pipe_clk",
+ "usb3_phy_wrapper_gcc_usb30_pipe_clk";
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
--
2.34.1
