On Samstag, 23. September 2023 00:40:27 CEST Matti Lehtimäki wrote:
> Add pin <-> wakeirq mappings to allow for waking up the AP from sleep
> through MPM-connected pins.
>
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
Based on the discussion in the 8226 patch, this looks correct, compared with
downstream arch/arm/boot/dts/msm8974pro-pm.dtsi.
Reviewed-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> drivers/pinctrl/qcom/pinctrl-msm8x74.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm8x74.c
> b/drivers/pinctrl/qcom/pinctrl-msm8x74.c index d5fe62992849..238c83f6ec4f
> 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c
> @@ -1045,6 +1045,16 @@ static const struct msm_pingroup msm8x74_groups[] = {
>
> #define NUM_GPIO_PINGROUPS 146
>
> +static const struct msm_gpio_wakeirq_map msm8x74_mpm_map[] = {
> + { 1, 4 }, { 5, 5 }, { 9, 6 }, { 18, 7 }, { 20, 8 }, { 24, 9 },
> + { 27, 10 }, { 28, 11 }, { 34, 12 }, { 35, 13 }, { 37, 14 }, { 42, 15
},
> + { 44, 16 }, { 46, 17 }, { 50, 18 }, { 54, 19 }, { 59, 20 }, { 61, 21
},
> + { 62, 22 }, { 64, 23 }, { 65, 24 }, { 66, 25 }, { 67, 26 }, { 68, 27
},
> + { 71, 28 }, { 72, 29 }, { 73, 30 }, { 74, 31 }, { 75, 32 }, { 77, 33
},
> + { 79, 34 }, { 80, 35 }, { 82, 36 }, { 86, 37 }, { 92, 38 }, { 93, 39
},
> + { 95, 40 }, { 102, 3 }, { 144, 41 },
> +};
> +
> static const struct msm_pinctrl_soc_data msm8x74_pinctrl = {
> .pins = msm8x74_pins,
> .npins = ARRAY_SIZE(msm8x74_pins),
> @@ -1053,6 +1063,8 @@ static const struct msm_pinctrl_soc_data
> msm8x74_pinctrl = { .groups = msm8x74_groups,
> .ngroups = ARRAY_SIZE(msm8x74_groups),
> .ngpios = NUM_GPIO_PINGROUPS,
> + .wakeirq_map = msm8x74_mpm_map,
> + .nwakeirq_map = ARRAY_SIZE(msm8x74_mpm_map),
> };
>
> static int msm8x74_pinctrl_probe(struct platform_device *pdev)
