Re: [PATCH v1 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 20, 2023 at 07:25:12PM +0530, Mrinmay Sarkar wrote:
> Add ep pcie dtsi node for pcie0 controller found on sa8775p platform.
> 

It would be good to add more info in the commit message, like PCIe Gen, lane
info, IP revision etc...

> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 45 +++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 9f4f58e8..5571131 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2600,4 +2600,49 @@
>  
>  		status = "disabled";
>  	};
> +
> +	pcie0_ep: pcie-ep@1c00000 {
> +		compatible = "qcom,sa8775p-pcie-ep";
> +		reg = <0x0 0x01c00000 0x0 0x3000>,
> +		      <0x0 0x40000000 0x0 0xf20>,
> +		      <0x0 0x40000f20 0x0 0xa8>,
> +		      <0x0 0x40001000 0x0 0x4000>,
> +		      <0x0 0x40200000 0x0 0x100000>,
> +		      <0x0 0x01c03000 0x0 0x1000>,
> +		      <0x0 0x40005000 0x0 0x2000>;
> +		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> +			    "mmio", "dma";
> +
> +		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
> +
> +		clock-names = "aux",
> +			      "cfg",
> +			      "bus_master",
> +			      "bus_slave",
> +			      "slave_q2a";
> +
> +		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		interrupt-names = "global", "doorbell", "dma";
> +
> +		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
> +		interconnect-names = "pcie-mem", "cpu-pcie";
> +

Don't you need iommu property?

> +		resets = <&gcc GCC_PCIE_0_BCR>;
> +		reset-names = "core";
> +		power-domains = <&gcc PCIE_0_GDSC>;
> +		phys = <&pcie0_phy>;
> +		phy-names = "pciephy";
> +		max-link-speed = <3>;

Gen 3?

> +		num-lanes = <2>;

Only 2 lanes? Or the other one has 4 lanes?

- Mani

> +
> +		status = "disabled";
> +	};
>  };
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux