Re: [PATCH 2/3] drm/msm/dpu: Add missing DPU_DSC_OUTPUT_CTRL to SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/20/2023 3:46 PM, Konrad Dybcio wrote:
DPU_DSC_OUTPUT_CTRL should be enabled for all platforms with a CTL
CFG 1.0.0. SC7280 is one of them. Add it.


sc7280 and all other chipsets using DSC 1.2 use dpu_hw_dsc_init_1_2 and not dpu_hw_dsc_init.

dpu_hw_dsc_init_1_2 assigns the dsc_bind_pingpong_blk op by default.

So this change is not needed.

Fixes: 0d1b10c63346 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
index dc3198335164..b6a59d7b94c4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
@@ -164,7 +164,7 @@ static const struct dpu_dsc_cfg sc7280_dsc[] = {
  	{
  		.name = "dce_0_0", .id = DSC_0,
  		.base = 0x80000, .len = 0x4,
-		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN) | BIT(DPU_DSC_OUTPUT_CTRL),
  		.sblk = &dsc_sblk_0,
  	},
  };




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux