Re: [PATCH v2 1/4] arm64: dts: qcom: sm8250: Add DisplayPort device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 17, 2023 at 05:59:37PM +0300, Dmitry Baryshkov wrote:
> Declare the displayport controller present on the Qualcomm SM8250 SoC.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 89 ++++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index eb00bbd3e1f3..8d705a1713fb 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3638,6 +3638,8 @@ port@1 {
>  
>  				port@2 {
>  					reg = <2>;
> +
> +					usb_1_qmpphy_dp_in: endpoint {};
>  				};
>  			};
>  		};
> @@ -4405,6 +4407,14 @@ dpu_intf2_out: endpoint {
>  							remote-endpoint = <&mdss_dsi1_in>;
>  						};
>  					};
> +
> +					port@2 {
> +						reg = <2>;
> +
> +						dpu_intf0_out: endpoint {
> +							remote-endpoint = <&mdss_dp_in>;
> +						};
> +					};
>  				};
>  
>  				mdp_opp_table: opp-table {
> @@ -4432,6 +4442,85 @@ opp-460000000 {
>  				};
>  			};
>  
> +			mdss_dp: displayport-controller@ae90000 {

displayport-controller does not seem to be a valid child node of the
sm8250 mdss. Please make sure that the binding is updated, if not
already done.

Thanks,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux