Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 18 Sept 2023 at 20:48, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
>
> On 9/15/2023 6:21 PM, Dmitry Baryshkov wrote:
> > On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
> >> Add pm_runtime_force_suspend()/resume() to complete incorporating pm
> >> runtime framework into DP driver. Both dp_pm_prepare() and dp_pm_complete()
> >> are added to set hpd_state to correct state. After resume, DP driver will
> >> re training its main link after .hpd_enable() callback enabled HPD
> >> interrupts and bring up display accordingly.
> > How will it re-train the main link? What is the code path for that?
>
> 1) for edp, dp_bridge_atomic_enable(), called from framework, to start
> link training and bring up display.

And this path doesn't use .hpd_enable() which you have mentioned in
the commit message. Please don't try to shorten the commit message.
You see, I have had questions to several of them, which means that
they were not verbose enough.

>
> 2) for external DP, HPD_PLUG_INT will be generated to start link
> training and bring up display.

This should be hpd_notify, who starts link training, not some event.

>
> >
> > I think this is a misuse for prepare/complete callbacks, at least
> > judging from their documentation.
>
> 1) dp_pm_prepare() is called to make sure eDP/DP related power/clocks
> are off and set hpd_state  to ST_SUSPENDED and nothing else.
>
> 2) dp_pm_completed() is called to set hpd_state to ST_ST_DISCONNECTED
> (default state) and nothing else.
>
> I think both are doing proper action.

Have you read the prepare() / complete() documentation? Does your
usage follow the documented use case?

>
>
> >
> >> Changes in v3:
> >> -- replace dp_pm_suspend() with pm_runtime_force_suspend()
> >> -- replace dp_pm_resume() with pm_runtime_force_resume()
> >>
> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/msm/dp/dp_display.c | 87 +++++--------------------------------
> >>   1 file changed, 10 insertions(+), 77 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> >> index b6992202..b58cb02 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >> @@ -1333,101 +1333,35 @@ static int dp_pm_runtime_resume(struct device *dev)
> >>          return 0;
> >>   }
> >>
> >> -static int dp_pm_resume(struct device *dev)
> >> +static void dp_pm_complete(struct device *dev)
> >>   {
> >> -       struct platform_device *pdev = to_platform_device(dev);
> >> -       struct msm_dp *dp_display = platform_get_drvdata(pdev);
> >> -       struct dp_display_private *dp;
> >> -       int sink_count = 0;
> >> -
> >> -       dp = container_of(dp_display, struct dp_display_private, dp_display);
> >> +       struct dp_display_private *dp = dev_get_dp_display_private(dev);
> >>
> >>          mutex_lock(&dp->event_mutex);
> >>
> >>          drm_dbg_dp(dp->drm_dev,
> >> -               "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> >> +               "type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> >>                  dp->dp_display.connector_type, dp->core_initialized,
> >> -               dp->phy_initialized, dp_display->power_on);
> >> +               dp->phy_initialized, dp->dp_display.power_on);
> >>
> >>          /* start from disconnected state */
> >>          dp->hpd_state = ST_DISCONNECTED;
> >>
> >> -       /* turn on dp ctrl/phy */
> >> -       dp_display_host_init(dp);
> >> -
> >> -       if (dp_display->is_edp)
> >> -               dp_catalog_ctrl_hpd_enable(dp->catalog);
> >> -
> >> -       if (dp_catalog_link_is_connected(dp->catalog)) {
> >> -               /*
> >> -                * set sink to normal operation mode -- D0
> >> -                * before dpcd read
> >> -                */
> >> -               dp_display_host_phy_init(dp);
> >> -               dp_link_psm_config(dp->link, &dp->panel->link_info, false);
> >> -               sink_count = drm_dp_read_sink_count(dp->aux);
> >> -               if (sink_count < 0)
> >> -                       sink_count = 0;
> >> -
> >> -               dp_display_host_phy_exit(dp);
> >> -       }
> >> -
> >> -       dp->link->sink_count = sink_count;
> >> -       /*
> >> -        * can not declared display is connected unless
> >> -        * HDMI cable is plugged in and sink_count of
> >> -        * dongle become 1
> >> -        * also only signal audio when disconnected
> >> -        */
> >> -       if (dp->link->sink_count) {
> >> -               dp->dp_display.link_ready = true;
> >> -       } else {
> >> -               dp->dp_display.link_ready = false;
> >> -               dp_display_handle_plugged_change(dp_display, false);
> >> -       }
> >> -
> >> -       drm_dbg_dp(dp->drm_dev,
> >> -               "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n",
> >> -               dp->dp_display.connector_type, dp->link->sink_count,
> >> -               dp->dp_display.link_ready, dp->core_initialized,
> >> -               dp->phy_initialized, dp_display->power_on);
> >> -
> >>          mutex_unlock(&dp->event_mutex);
> >> -
> >> -       return 0;
> >>   }
> >>
> >> -static int dp_pm_suspend(struct device *dev)
> >> +static int dp_pm_prepare(struct device *dev)
> >>   {
> >> -       struct platform_device *pdev = to_platform_device(dev);
> >> -       struct msm_dp *dp_display = platform_get_drvdata(pdev);
> >> -       struct dp_display_private *dp;
> >> -
> >> -       dp = container_of(dp_display, struct dp_display_private, dp_display);
> >> +       struct dp_display_private *dp = dev_get_dp_display_private(dev);
> >>
> >>          mutex_lock(&dp->event_mutex);
> >>
> >> -       drm_dbg_dp(dp->drm_dev,
> >> -               "Before, type=%d core_inited=%d  phy_inited=%d power_on=%d\n",
> >> -               dp->dp_display.connector_type, dp->core_initialized,
> >> -               dp->phy_initialized, dp_display->power_on);
> >> -
> >>          /* mainlink enabled */
> >>          if (dp_power_clk_status(dp->power, DP_CTRL_PM))
> >>                  dp_ctrl_off_link_stream(dp->ctrl);
> >>
> >> -       dp_display_host_phy_exit(dp);
> >> -
> >> -       /* host_init will be called at pm_resume */
> >> -       dp_display_host_deinit(dp);
> >> -
> >>          dp->hpd_state = ST_SUSPENDED;
> >>
> >> -       drm_dbg_dp(dp->drm_dev,
> >> -               "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> >> -               dp->dp_display.connector_type, dp->core_initialized,
> >> -               dp->phy_initialized, dp_display->power_on);
> >> -
> >>          mutex_unlock(&dp->event_mutex);
> >>
> >>          return 0;
> >> @@ -1435,8 +1369,10 @@ static int dp_pm_suspend(struct device *dev)
> >>
> >>   static const struct dev_pm_ops dp_pm_ops = {
> >>          SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
> >> -       .suspend = dp_pm_suspend,
> >> -       .resume =  dp_pm_resume,
> >> +       SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> >> +                                pm_runtime_force_resume)
> >> +       .prepare = dp_pm_prepare,
> >> +       .complete = dp_pm_complete,
> >>   };
> >>
> >>   static struct platform_driver dp_display_driver = {
> >> @@ -1670,9 +1606,6 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> >>
> >>          dp_display = container_of(dp, struct dp_display_private, dp_display);
> >>
> >> -       if (dp->is_edp)
> >> -               dp_hpd_unplug_handle(dp_display, 0);
> >> -
> >>          mutex_lock(&dp_display->event_mutex);
> >>
> >>          state = dp_display->hpd_state;
> >> --
> >> 2.7.4
> >>
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux