Re: [PATCH v2 8/8] arm64: defconfig: enable interconnect and pinctrl for SM4450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/15/2023 7:21 PM, Trilok Soni wrote:
> On 9/15/2023 4:29 AM, Krzysztof Kozlowski wrote:
>> On 15/09/2023 13:18, Tengfei Fan wrote:
>>>
>>>
>>> 在 9/15/2023 5:16 PM, Krzysztof Kozlowski 写道:
>>>> On 15/09/2023 11:12, Tengfei Fan wrote:
>>>>>
>>>>>
>>>>> 在 9/15/2023 3:21 PM, Krzysztof Kozlowski 写道:
>>>>>> On 15/09/2023 04:15, Tengfei Fan wrote:
>>>>>>> Add the SM4450 interconnect and pinctrl drivers as built-in for
>>>>>>> support the Qualcomm SM4450 platform to boot to uart shell.
>>>>>>>
>>>>>>> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
>>>>>>> ---
>>>>>>>    arch/arm64/configs/defconfig | 2 ++
>>>>>>>    1 file changed, 2 insertions(+)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>>>>>>> index ec59174b14db..e91993de865e 100644
>>>>>>> --- a/arch/arm64/configs/defconfig
>>>>>>> +++ b/arch/arm64/configs/defconfig
>>>>>>> @@ -598,6 +598,7 @@ CONFIG_PINCTRL_SC8280XP=y
>>>>>>>    CONFIG_PINCTRL_SDM660=y
>>>>>>>    CONFIG_PINCTRL_SDM670=y
>>>>>>>    CONFIG_PINCTRL_SDM845=y
>>>>>>> +CONFIG_PINCTRL_SM4450=y
>>>>>>>    CONFIG_PINCTRL_SM6115=y
>>>>>>>    CONFIG_PINCTRL_SM6125=y
>>>>>>>    CONFIG_PINCTRL_SM6350=y
>>>>>>> @@ -1500,6 +1501,7 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y
>>>>>>>    CONFIG_INTERCONNECT_QCOM_SC8180X=y
>>>>>>>    CONFIG_INTERCONNECT_QCOM_SC8280XP=y
>>>>>>>    CONFIG_INTERCONNECT_QCOM_SDM845=y
>>>>>>> +CONFIG_INTERCONNECT_QCOM_SM4450=y
>>>>>>
>>>>>> Why it cannot be =m?
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>>>
>>>>>
>>>>> Hi Krzysztof,
>>>>> Because system haven't capacity of loading ko files at this time on
>>>>> SM4450 platform, so setting to "Y".
>>>>
>>>> Hm? System has this capability. All systems have. What is so different
>>>> on SM4450 comparing to everything else we have here?
>>>>
>>>> No, this should be =m and you need to fix your system.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>>>
>>> Hi Krzysztof,
>>> Find new way which can load ko files on SM4450 platform, still need use 
>>> "Y", because of some other modules have dependence to these two config, 
>>> like scm, smmu module drivers, uart shell console cannot be got if set 
>>> to "m".
>>
>> That's what I am asking, which device exactly needs it.
>>
>>>
>>> Also do test for setting these two config to "m" on SM8450 platform, get 
>>> uart shell consle failed if so setting.
>>
>> Yeah, this we know, I did this. I am asking about SM4450.
> 
> Why we have =m requirement when other drivers above are =Y?. Can we confirm
> w/ Georgi? I am not aware that Interconnect drivers needs to be =m only.
> 
> CONFIG_INTERCONNECT_QCOM_SC8180X=y
> CONFIG_INTERCONNECT_QCOM_SC8280XP=y
> CONFIG_INTERCONNECT_QCOM_SDM845=y

Complete list here, and it is inconsistent. Latest 8550 is also =y. Do we document
the reasons somewhere on why they are added as =y?

CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_MSM8916=m
CONFIG_INTERCONNECT_QCOM_MSM8996=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCM2290=m
CONFIG_INTERCONNECT_QCOM_QCS404=m
CONFIG_INTERCONNECT_QCOM_SA8775P=y
CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
CONFIG_INTERCONNECT_QCOM_SC8280XP=y
CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_INTERCONNECT_QCOM_SM8350=m
CONFIG_INTERCONNECT_QCOM_SM8450=y
CONFIG_INTERCONNECT_QCOM_SM8550=y

-- 
---Trilok Soni




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux