[PATCH v6 27/33] ASoC: qcom: qdsp6: Add support to track available USB PCM devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The USB backend should know about which sound resources are being shared
between the ASoC and USB SND paths.  This can be utilized to properly
select and maintain the offloading devices.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
 sound/soc/qcom/qdsp6/q6usb.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 0467d8a533fb..2c0d482de3ab 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -25,10 +25,18 @@
 
 #define SID_MASK	0xF
 
+struct q6usb_status {
+	unsigned int num_pcm;
+	unsigned int chip_index;
+	unsigned int pcm_index;
+};
+
 struct q6usb_port_data {
 	struct q6afe_usb_cfg usb_cfg;
 	struct snd_soc_usb *usb;
 	struct q6usb_offload priv;
+	unsigned long available_card_slot;
+	struct q6usb_status status[SNDRV_CARDS];
 	int active_idx;
 };
 
@@ -110,6 +118,14 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
 	if (connected) {
 		/* We only track the latest USB headset plugged in */
 		data->active_idx = sdev->card_idx;
+
+		set_bit(sdev->card_idx, &data->available_card_slot);
+		data->status[sdev->card_idx].num_pcm = sdev->num_playback;
+		data->status[sdev->card_idx].chip_index = sdev->chip_idx;
+	} else {
+		clear_bit(sdev->card_idx, &data->available_card_slot);
+		data->status[sdev->card_idx].num_pcm = 0;
+		data->status[sdev->card_idx].chip_index = 0;
 	}
 
 	return 0;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux