The Kconfig options belongs closer to the corresponding implementations, hence let's move them from the soc subsystem to the pmdomain subsystem. Cc: Bjorn Andersson <andersson@xxxxxxxxxx> Cc: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Cc: Andy Gross <agross@xxxxxxxxxx> Cc: <linux-arm-msm@xxxxxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> --- drivers/pmdomain/Kconfig | 1 + drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++ drivers/soc/qcom/Kconfig | 37 ------------------------------- 3 files changed, 42 insertions(+), 37 deletions(-) create mode 100644 drivers/pmdomain/qcom/Kconfig diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index 5929f2d31588..d7b554c5c384 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig" source "drivers/pmdomain/bcm/Kconfig" source "drivers/pmdomain/imx/Kconfig" source "drivers/pmdomain/mediatek/Kconfig" +source "drivers/pmdomain/qcom/Kconfig" endmenu diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig new file mode 100644 index 000000000000..c67308337805 --- /dev/null +++ b/drivers/pmdomain/qcom/Kconfig @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Qualcomm Power Domains" + +config QCOM_CPR + tristate "QCOM Core Power Reduction (CPR) support" + depends on ARCH_QCOM && HAS_IOMEM + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on Qualcomm + SoCs like QCS404. + + This driver populates CPU OPPs tables and makes adjustments to the + tables based on feedback from the CPR hardware. If you want to do + CPUfrequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr + +config QCOM_RPMHPD + tristate "Qualcomm RPMh Power domain driver" + depends on QCOM_RPMH && QCOM_COMMAND_DB + help + QCOM RPMh Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPMh which then translates it into corresponding voltage + for the voltage rail. + +config QCOM_RPMPD + tristate "Qualcomm RPM Power domain driver" + depends on PM && OF + depends on QCOM_SMD_RPM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF + help + QCOM RPM Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPM which then translates it into corresponding voltage + for the voltage rail. + +endmenu diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 715348869d04..b3634e10f6f5 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -26,22 +26,6 @@ config QCOM_COMMAND_DB resource on a RPM-hardened platform must use this database to get SoC specific identifier and information for the shared resources. -config QCOM_CPR - tristate "QCOM Core Power Reduction (CPR) support" - depends on ARCH_QCOM && HAS_IOMEM - select PM_OPP - select REGMAP - help - Say Y here to enable support for the CPR hardware found on Qualcomm - SoCs like QCS404. - - This driver populates CPU OPPs tables and makes adjustments to the - tables based on feedback from the CPR hardware. If you want to do - CPUfrequency scaling say Y here. - - To compile this driver as a module, choose M here: the module will - be called qcom-cpr - config QCOM_GENI_SE tristate "QCOM GENI Serial Engine Driver" depends on ARCH_QCOM || COMPILE_TEST @@ -157,27 +141,6 @@ config QCOM_RPMH of hardware components aggregate requests for these resources and help apply the aggregated state on the resource. -config QCOM_RPMHPD - tristate "Qualcomm RPMh Power domain driver" - depends on QCOM_RPMH && QCOM_COMMAND_DB - help - QCOM RPMh Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPMh which then translates it into corresponding voltage - for the voltage rail. - -config QCOM_RPMPD - tristate "Qualcomm RPM Power domain driver" - depends on PM && OF - depends on QCOM_SMD_RPM - select PM_GENERIC_DOMAINS - select PM_GENERIC_DOMAINS_OF - help - QCOM RPM Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPM which then translates it into corresponding voltage - for the voltage rail. - config QCOM_SMEM tristate "Qualcomm Shared Memory Manager (SMEM)" depends on ARCH_QCOM || COMPILE_TEST -- 2.34.1
