[PATCH v2 07/11] clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While the kernel is booting up, APSS PLL will be running at 800MHz with
GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
configured and select the rate based on the opp table and the source will
be changed to APSS_PLL_EARLY.

Without this patch, CPU Freq driver reports that CPU is running at 24MHz
instead of the 800MHz.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Tested-by: Robert Marko <robimarko@xxxxxxxxx>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
---
Changes in V2:
	- Pick up te R-b and T-b tags. Thanks Robert!
---
 drivers/clk/qcom/apss-ipq6018.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
index f2f502e2d5a4..4e13a085a857 100644
--- a/drivers/clk/qcom/apss-ipq6018.c
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -20,16 +20,19 @@
 
 enum {
 	P_XO,
+	P_GPLL0,
 	P_APSS_PLL_EARLY,
 };
 
 static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
 	{ .fw_name = "xo" },
+	{ .fw_name = "gpll0" },
 	{ .fw_name = "pll" },
 };
 
 static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
 	{ P_XO, 0 },
+	{ P_GPLL0, 4 },
 	{ P_APSS_PLL_EARLY, 5 },
 };
 

-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux