Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Neil,

On Wed, Sep 13, 2023 at 11:38:19AM +0200, Neil Armstrong wrote:
> On new platforms (starting from SM8450) UCSI is mandatory to have
> pmic_glink_altmode events triggering.

You can also populate the typec devices conditionally, only if UCSI is
not supported.

However, I took a peek at drivers/soc/qcom/pmic_glink_altmode.c, and
it seems to be mostly is dealing with the muxes and retimer, and
sending the HPD notifications to the DRM side. All that is already
done in typec drivers, so there is actually a potential race here when
UCSI is used.

On top of that, it is sending two commands to the PMIC (ALTMODE_PAN_EN
and ALTMODE_PAN_ACK). I'm pretty sure both could be handled in the UCSI
glue driver (drivers/usb/typec/ucsi/ucsi_glink.c) if they are even
needed when UCSI is supported.

So why do you need that pmic_glibk_altmode driver at all when UCSI is
supported?

I don't know the hardware, so I may be missing something.

thanks,

-- 
heikki



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux