Re: [PATCH v3 2/9] arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 08/09/2023 12:22, Vignesh Raman wrote:
Due to the presence of the fastboot micro cable in the CI farm,
it causes the hardware to remain in gadget mode instead of host mode.
So it doesn't find the network, which results in failure to mount root
fs via NFS.

Add an overlay dtso file that sets the dr_mode to host, allowing
the USB controllers to work in host mode. This dtso file will be used
in drm-ci, mesa-ci.

Overlay DT file uses the sugar syntax [suggested by Dmitry Baryshkov and Maxime Ripard]

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Suggested-by: Maxime Ripard <mripard@xxxxxxxxxx>
Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>
Signed-off-by: David Heidelberg <david.heidelberg@xxxxxxxxxxxxx>
Signed-off-by: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>

Acked-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>

---

v3:
   - New patch in the series to add device tree overlay in arch/arm64/boot/dts/qcom

---
  arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso | 8 ++++++++
  1 file changed, 8 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso
new file mode 100644
index 000000000000..a82c26b7eae8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&usb {
+         dr_mode = "host";
+};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux