The GENI UART driver requires one specifies a numeric alias. Do so and
set the stdout-path to route the console to the debug uart in the microSD
slot by default.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index ecdc20bc10f5..e07d0311ecb5 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -18,7 +18,12 @@ / {
qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
qcom,board-id = <0x10008 0>;
+ aliases {
+ serial0 = &uart12;
+ };
+
chosen {
+ stdout-path = "serial0:115200n8";
#address-cells = <2>;
#size-cells = <2>;
ranges;
---
base-commit: 3c13c772fc233a10342c8e1605ff0855dfdf0c89
change-id: 20230912-topic-edoconsole-f1395cae5f9a
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
