This patch removes i2c pinctrl properties from board which which are now mentioned in the SOC specific file. This will avoid redundant properties across multiple board fiiles. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 11 ----------- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 5 ----- arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++++ 3 files changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 47c0282..80ab5b8 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -13,15 +13,6 @@ }; soc { - pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - }; - rpm@108000 { regulators { vin_lvs1_3_6-supply = <&pm8921_s4>; @@ -96,8 +87,6 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom: eeprom@50 { compatible = "24c02"; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f3100da..b701f33 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -119,8 +119,6 @@ qcom,mode = <GSBI_PROT_I2C>; i2c3: i2c@16280000 { status = "okay"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; }; }; @@ -131,8 +129,6 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom: eeprom@52 { compatible = "atmel,24c128"; @@ -148,7 +144,6 @@ serial@16540000 { status = "ok"; - pinctrl-names = "default"; pinctrl-0 = <&uart_pins>; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d2e94d6..53d5311 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -213,6 +213,8 @@ i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -258,6 +260,8 @@ ranges; i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html