Add pin <-> wakeirq mappings to allow for waking up the AP from sleep
through MPM-connected pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-msm8996.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8996.c b/drivers/pinctrl/qcom/pinctrl-msm8996.c
index 46cc0b49dbab..1b5d80eaab83 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8996.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8996.c
@@ -1880,6 +1880,18 @@ static const struct msm_pingroup msm8996_groups[] = {
SDC_QDSD_PINGROUP(sdc1_rclk, 0x12c000, 15, 0),
};
+static const struct msm_gpio_wakeirq_map msm8996_mpm_map[] = {
+ { 1, 3 }, { 5, 4 }, { 9, 5 }, { 11, 6 }, { 66, 7 }, { 22, 8 }, { 24, 9 }, { 26, 10 },
+ { 34, 11 }, { 36, 12 }, { 37, 13 }, { 38, 14 }, { 40, 15 }, { 42, 16 }, { 46, 17 },
+ { 50, 18 }, { 53, 19 }, { 54, 20 }, { 56, 21 }, { 57, 22 }, { 58, 23 }, { 59, 24 },
+ { 60, 25 }, { 61, 26 }, { 62, 27 }, { 63, 28 }, { 64, 29 }, { 71, 30 }, { 73, 31 },
+ { 77, 32 }, { 78, 33 }, { 79, 34 }, { 80, 35 }, { 82, 36 }, { 86, 37 }, { 91, 38 },
+ { 92, 39 }, { 95, 40 }, { 97, 41 }, { 101, 42 }, { 104, 43 }, { 106, 44 }, { 108, 45 },
+ { 112, 46 }, { 113, 47 }, { 110, 48 }, { 127, 50 }, { 115, 51 }, { 116, 54 }, { 117, 55 },
+ { 118, 56 }, { 119, 57 }, { 120, 58 }, { 121, 59 }, { 122, 60 }, { 123, 61 }, { 124, 62 },
+ { 125, 63 }, { 126, 64 }, { 129, 65 }, { 131, 66 }, { 132, 67 }, { 133, 68 }, { 145, 69 },
+};
+
static const struct msm_pinctrl_soc_data msm8996_pinctrl = {
.pins = msm8996_pins,
.npins = ARRAY_SIZE(msm8996_pins),
@@ -1888,6 +1900,8 @@ static const struct msm_pinctrl_soc_data msm8996_pinctrl = {
.groups = msm8996_groups,
.ngroups = ARRAY_SIZE(msm8996_groups),
.ngpios = 150,
+ .wakeirq_map = msm8996_mpm_map,
+ .nwakeirq_map = ARRAY_SIZE(msm8996_mpm_map),
};
static int msm8996_pinctrl_probe(struct platform_device *pdev)
--
2.42.0
