On Fri, 24 Mar 2023 at 22:23, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> 'clocks' node is not a bus, but just a placeholder for clocks:
>
> apq8096-db820c.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
> From schema: dtschema/schemas/simple-bus.yaml
> apq8096-db820c.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
> From schema: dtschema/schemas/simple-bus.yaml
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
This patch broke audio support on DB820c. Now the divclk1 clock is not
registered, as drivers/clk/clk-gpio.c doesn't have CLK_OF_DECLARE().
Stephen, What would be the best way to fix this? Add CLK_OF_DECLARE
support to clk-gpio.c? Or simply move divclk1 from /clocks into a
separate device?
What is the rule, which clock drivers must support such device-less
binding using /clocks/foo nodes?
> ---
> arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> index 4476e2e22816..b599909c4463 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> @@ -63,7 +63,6 @@ chosen {
> };
>
> clocks {
> - compatible = "simple-bus";
> divclk4: divclk4 {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> --
> 2.34.1
>
--
With best wishes
Dmitry
