Re: [PATCH V6 0/5] Add camera clock controller support for SM8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/7/2023 9:27 AM, Jagadeesh Kona wrote:
Add bindings, driver and devicetree node for camera clock controller on
SM8550.

Changes in v6:
  - Updated parent map and frequency table of cam_cc_xo_clk_src to use
    active only source P_BI_TCXO_AO instead of P_BI_TCXO

Changes in v5:
  - Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's
  - Used module_platform_driver() instead of subsys_initcall()
  - Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields

Changes in v4:
  - Dropped the extra patches added in v2, since the review comments on
    v3 recommended an alternate solution

Changes in v3:
  - Squashed 2 extra patches added in v2 into single patch as per review
    comments

Changes in v2:
  - Took care of review comments from v1
      + Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550
      + Sorted the PLL names in proper order
      + Updated all PLL configurations to lower case hex
      + Reused evo ops instead of adding new ops for ole pll
      + Moved few clocks to separate patch to fix patch too long error
      + Padded non-zero address part to 8 hex digits in DT change
  - Added 2 extra patches updating .l config value across chipsets to
    include CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L
    field explicitly in clk_lucid_evo_pll_configure().

v1:
   - Initial CAMCC changes for SM8550

Previous series:
v5 - https://patchwork.kernel.org/project/linux-clk/list/?series=759863
v4 - https://patchwork.kernel.org/project/linux-clk/list/?series=755683
v3 - https://patchwork.kernel.org/project/linux-clk/list/?series=753150
v2 - https://patchwork.kernel.org/project/linux-clk/list/?series=751058
v1 - https://patchwork.kernel.org/project/linux-clk/list/?series=749294

Jagadeesh Kona (5):
   dt-bindings: clock: qcom: Add SM8550 camera clock controller
   clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
   clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
   clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
   arm64: dts: qcom: sm8550: Add camera clock controller

  .../bindings/clock/qcom,sm8450-camcc.yaml     |    8 +-
  arch/arm64/boot/dts/qcom/sm8550.dtsi          |   15 +
  drivers/clk/qcom/Kconfig                      |    7 +
  drivers/clk/qcom/Makefile                     |    1 +
  drivers/clk/qcom/camcc-sm8550.c               | 3564 +++++++++++++++++
  drivers/clk/qcom/clk-alpha-pll.c              |   29 +
  drivers/clk/qcom/clk-alpha-pll.h              |    2 +
  include/dt-bindings/clock/qcom,sm8550-camcc.h |  187 +
  8 files changed, 3811 insertions(+), 2 deletions(-)
  create mode 100644 drivers/clk/qcom/camcc-sm8550.c
  create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h


Hi Bjorn,

All patches in this series are in reviewed state, could you please help to pick this series in the next release? Thanks!

Thanks,
Jagadeesh



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux