[PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update the pmi632 lpg_data struct so that pmi632 devices use PPG
for LUT pattern.

Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 90dc27d5eb7c..0b37d3b539f8 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -1672,11 +1672,14 @@ static const struct lpg_data pm8994_lpg_data = {
 static const struct lpg_data pmi632_lpg_data = {
 	.triled_base = 0xd000,
 
+	.lut_size = 64,
+	.lut_sdam_base = 0x80,
+
 	.num_channels = 5,
 	.channels = (const struct lpg_channel_data[]) {
-		{ .base = 0xb300, .triled_mask = BIT(7) },
-		{ .base = 0xb400, .triled_mask = BIT(6) },
-		{ .base = 0xb500, .triled_mask = BIT(5) },
+		{ .base = 0xb300, .triled_mask = BIT(7), .sdam_offset = 0x48 },
+		{ .base = 0xb400, .triled_mask = BIT(6), .sdam_offset = 0x56 },
+		{ .base = 0xb500, .triled_mask = BIT(5), .sdam_offset = 0x64 },
 		{ .base = 0xb600 },
 		{ .base = 0xb700 },
 	},
-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux