On Tue, 29 Aug 2023 at 17:00, Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> wrote: > > This patch adds ipq5332 USB SS UNIPHY support. First, please read to Documentation/process/submitting-patches.rst, then rewrite the commit message. Next, I tend to say that this driver doesn't have a lot in common with the ipq4019 driver you have modified. Please consider adding new driver for ipq5332, then we can see whether it makes sense to fold ipq4019 to use new infrastructure. > > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> > --- > This patch depends on the below series which adds support for USB2 in > IPQ5332 > https://lore.kernel.org/all/cover.1692699472.git.quic_varada@xxxxxxxxxxx/ > > drivers/phy/qualcomm/phy-qcom-uniphy.c | 37 ++++++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy.c b/drivers/phy/qualcomm/phy-qcom-uniphy.c > index eb71588f5417..91487e68bb6e 100644 > --- a/drivers/phy/qualcomm/phy-qcom-uniphy.c > +++ b/drivers/phy/qualcomm/phy-qcom-uniphy.c > @@ -26,6 +26,10 @@ > #include <linux/regulator/consumer.h> > #include <linux/reset.h> > > +#define PCIE_USB_COMBO_PHY_CFG_MISC1 0x214 > +#define PCIE_USB_COMBO_PHY_CFG_RX_AFE_2 0x7C4 > +#define PCIE_USB_COMBO_PHY_CFG_RX_DLF_DEMUX_2 0x7E8 > + > struct uniphy_init_tbl { > unsigned int offset; > unsigned int val; > @@ -37,6 +41,12 @@ struct uniphy_init_tbl { > .val = v, \ > } > > +static const struct uniphy_init_tbl ipq5332_usb_ssphy_init_tbl[] = { > + UNIPHY_INIT_CFG(PCIE_USB_COMBO_PHY_CFG_RX_AFE_2, 0x1076), > + UNIPHY_INIT_CFG(PCIE_USB_COMBO_PHY_CFG_RX_DLF_DEMUX_2, 0x3142), > + UNIPHY_INIT_CFG(PCIE_USB_COMBO_PHY_CFG_MISC1, 0x3), > +}; > + > struct uniphy_cfg { > const struct uniphy_init_tbl *init_seq; > int num_init_seq; > @@ -83,6 +93,32 @@ static const struct uniphy_cfg ipq4019_usb_hsphy_cfg = { > .reset_udelay = 10000, > }; > > +static const char * const ipq5332_usb_ssphy_clk_l[] = { > + "phy_ahb", "phy_cfg_ahb", "pipe", > +}; > + > +static const char * const ipq5332_usb_ssphy_reset_l[] = { > + "por_rst", > +}; > + > +static const char * const ipq5332_usb_ssphy_vreg_l[] = { > + "vdda-phy", > +}; > + > +static const struct uniphy_cfg ipq5332_usb_ssphy_cfg = { > + .init_seq = ipq5332_usb_ssphy_init_tbl, > + .num_init_seq = ARRAY_SIZE(ipq5332_usb_ssphy_init_tbl), > + .clk_list = ipq5332_usb_ssphy_clk_l, > + .num_clks = ARRAY_SIZE(ipq5332_usb_ssphy_clk_l), > + .reset_list = ipq5332_usb_ssphy_reset_l, > + .num_resets = ARRAY_SIZE(ipq5332_usb_ssphy_reset_l), > + .vreg_list = ipq5332_usb_ssphy_vreg_l, > + .num_vregs = ARRAY_SIZE(ipq5332_usb_ssphy_vreg_l), > + .pipe_clk_rate = 250000000, > + .reset_udelay = 1, > + .autoload_udelay = 35, > +}; > + > static int phy_mux_sel(struct phy *phy) > { > struct qcom_uniphy *uniphy = phy_get_drvdata(phy); > @@ -396,6 +432,7 @@ static int qcom_uniphy_probe(struct platform_device *pdev) > static const struct of_device_id qcom_uniphy_of_match[] = { > { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hsphy_cfg}, > { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ssphy_cfg}, > + { .compatible = "qcom,ipq5332-usb-ssphy", .data = &ipq5332_usb_ssphy_cfg}, > { }, > }; > MODULE_DEVICE_TABLE(of, qcom_uniphy_of_match); > -- > 2.34.1 -- With best wishes Dmitry
